3076030 Phoenix Contact Terminal Blocks

Product Details

• Back of the hand protection
  guaranteed
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Setpoint
  1 N
• Nominal voltage UN
  400 V (phase conductor/phase conductor)
• Power frequency withstand voltage setpoint
  1.89 kV
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of aging test
  Test passed
• Rated surge voltage
  4 kV
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Short-time current
  0.48 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Nominal cross section
  4 mm²
Flammability rating according to UL 94
V0
Width
5.2 mm
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Bending test turns
135
Result of temperature-rise test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Color
gray
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Potentials
2
Insulating material
PA
Degree of pollution
3
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
End cover width
2.2 mm
Acceleration
30g
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Tensile test result
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Short circuit stability result
Test passed
Overvoltage category
III
Nominal current IN
24 A (with 4 mm² conductor cross section)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Note
Please observe the current carrying capacity of the DIN rails.
Tightening torque max
0.6 Nm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.75 mm²
ECLASS 4.1
27141100
Number of connections
5
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
51.5 mm
Tightening torque, min
0.5 Nm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
Result of voltage-drop test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
93.5 mm
Height NS 35/15
59 mm
Screw thread
M3
Stripping length
9 mm
Conductor cross section AWG max.
12
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 7.0
27141125
ETIM 6.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
51.2 mm
Connection
1st, 2nd and 3rd level
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ETIM 4.0
EC001329
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Number of levels
3
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.75 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141125
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC001329
UNSPSC 19.0
39121410