3076043 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Number of levels
  3
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Conductor cross section tensile test
  10 mm²
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height NS 35/15
  59 mm
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section solid max.
  10 mm²
• Degree of pollution
  3
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.5 kV
• Result of temperature-rise test
  Test passed
Short-time current
1.2 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 35/7,5
51.5 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141125
ECLASS 4.0
27141100
ETIM 7.0
EC001329
ETIM 6.0
EC001329
UNSPSC 13.2
39121410
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
95 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible max.
10 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Stripping length
9 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Nominal current IN
38 A (with 6 mm² conductor cross section)
Surge voltage test setpoint
4.8 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
90 N
Result of voltage-drop test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section AWG max.
8
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A5
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Finger protection
guaranteed
Open side panel
Yes
Tensile test result
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
10 mm²
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
8.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Connection method
Screw connection
Tightening torque, min
0.5 Nm
ECLASS 10.0.1
27141125
ECLASS 6.0
27141100
ECLASS 9.0
27141125
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Screw thread
M3
Tightening torque max
0.6 Nm
ETIM 4.0
EC001329
ECLASS 7.0
27141125
UNSPSC 18.0
39121410
Insulating material
PA
Maximum load current
47 A (with 10 mm² conductor cross section)
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W (the value is multiplied when connecting multiple levels)
Shock form
Half-sine
Bending test rotation speed
10 rpm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Result of thermal test
Test passed
Number of connections
4
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V (phase conductor/phase conductor)
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Tight fit on carrier
NS 35
Result of flexion and pull-out test
Test passed