3076034 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Nominal cross section
  4 mm²
• Overvoltage category
  III
• Current carrying capacity of the neutral busbar
  140 A
• Nominal current IN
  24 A (with 4 mm² conductor cross section)
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Insulating material
  PA
• Maximum load current
  30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
• Insulating material group
  I
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Conductor cross section tensile test
  4 mm²
• Result of tight fit on support
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Shock duration
  18 ms
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
93.5 mm
Height NS 35/15
59 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.75 mm²
Screw thread
M3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection in acc. with standard
UL
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Color
gray
Degree of pollution
3
Nominal voltage UN
400 V (phase conductor/phase conductor)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
51.5 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section solid min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Tightening torque, min
0.5 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 6.0
EC001329
UNSPSC 18.0
39121410
Number of levels
3
Flammability rating according to UL 94
V0
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
1 N
Requirements, voltage drop
≤ 3.2 mV
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.75 mm²
Tightening torque max
0.6 Nm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ECLASS 9.0
27141125
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Bending test turns
135
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Connection method
Screw connection
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141125
ECLASS 7.0
27141125
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
9 mm
Internal cylindrical gage
A3
ECLASS 10.0.1
27141125
ECLASS 5.1
27141100
ETIM 4.0
EC001329
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410