3064043 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Insulating material
  PA
• Overvoltage category
  III
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirements, voltage drop
  U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock form
  Semi-sinusoidal
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  56.6 mm
• Stripping length
  9 mm
• Conductor cross section solid min.
  0.14 mm²
• Max. AWG conductor cross section, flexible
  10
• 2 conductors with same cross section, solid min.
  0.14 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  1.5 mm²
• ECLASS 10.0.1
  27141126
• ECLASS 5.0
  27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
Number of levels
1
Area of application
Railway industry
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
6 mm²
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
2.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
49.1 mm
Tightening torque max
0.8 Nm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 5.1
27141100
UNSPSC 11
39121424
UNSPSC 19.0
39121410
Nominal cross section
4 mm²
Degree of pollution
3
Maximum load current
20 A (with 6 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.3 kA
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141126
ETIM 3.0
EC000886
UNSPSC 6.01
30211827
UNSPSC 12.01
39121424
UNSPSC 21.0
39121410
Color
gray
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
1.02 W
Open side panel
Yes
Surge voltage test setpoint
7.2 kV
Bending test rotation speed
10 (+/- 2) rpm
Tractive force setpoint
80 N
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Screw thread
M3
Tightening torque, min
0.6 Nm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000902
UNSPSC 7.0901
39121424
UNSPSC 20.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
20 A (with 6 mm² conductor cross section)
Back of the hand protection
guaranteed
Bending test turns
135
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
65.4 mm
Connection in acc. with standard
CSA
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A4
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ETIM 2.0
EC000886
ETIM 7.0
EC000902
UNSPSC 18.0
39121410