3064027 Phoenix Contact Terminal Blocks

Product Details

• Tractive force setpoint
  80 N
• Nominal cross section
  4 mm²
• Number of levels
  1
• Insulating material
  PA
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Nominal current IN
  20 A (with 6 mm² conductor cross section)
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Acceleration
  30g
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Connection in acc. with standard
CSA
Conductor cross section AWG max.
10
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Potentials
1
Rated surge voltage
6 kV
Degree of pollution
3
Open side panel
Yes
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Semi-sinusoidal
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Length
65.4 mm
Tightening torque max
0.8 Nm
Conductor cross section solid min.
0.14 mm²
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, solid max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000886
ETIM 4.0
EC000897
UNSPSC 12.01
39121424
UNSPSC 11
39121424
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
gray
Maximum load current
20 A (with 6 mm² conductor cross section)
Shock protection test specification
IEC 60529:2001-02
Surge voltage test setpoint
7.2 kV
Bending test turns
135
Conductor cross section tensile test
6 mm²
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
9 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
26
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 11.0
27141126
ECLASS 7.0
27141126
ETIM 3.0
EC000886
UNSPSC 6.01
30211827
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Requirements, voltage drop
U1 ≤ 6,4 mV (1,6 mV x number of conductorclamping units or disconnect unit contactpoints)U2 ≤ 1,5 x U1
Conductor cross section short circuit testing
2.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Screw thread
M3
Conductor cross section AWG min.
26
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 7.0901
39121424
UNSPSC 19.0
39121410