3064056 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Area of application
  Railway industry
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Surge voltage test setpoint
  7.2 kV
• Result of flexion and pull-out test
  Test passed
• Tight fit on carrier
  NS 35
• Color
  gray
• Rated surge voltage
  6 kV
• Maximum load current
  20 A (with 6 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Short circuit stability result
  Test passed
• ASD level
  0.02 g²/Hz
• Test directions
  X-, Y- and Z-axis
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 35/15
  56.6 mm
Stripping length
9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
6 mm²
Number of levels
1
Nominal cross section
4 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
1.02 W
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Tightening torque max
0.8 Nm
Conductor cross section solid min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Number of connections
4
Insulating material
PA
Nominal current IN
20 A (with 6 mm² conductor cross section)
Open side panel
Yes
Result of surge voltage test
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Acceleration
0,8 g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Screw connection
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 3.0
EC000886
UNSPSC 7.0901
39121424
UNSPSC 19.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
49.1 mm
Length
65.4 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000902
UNSPSC 12.01
39121424
UNSPSC 21.0
39121410
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Screw thread
M3
Tightening torque, min
0.6 Nm
Conductor cross section AWG min.
26
2 conductors with same cross section, solid min.
0.14 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 6.0
EC000902
ETIM 4.0
EC000902
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ETIM 2.0
EC000886
UNSPSC 6.01
30211827
UNSPSC 13.2
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 6.0
27141100
UNSPSC 11
39121424
UNSPSC 20.0
39121410