3064137 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
• Rated surge voltage
  8 kV
• Maximum load current
  0.5 A
• Result of power-frequency withstand voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Requirements, voltage drop
  ≤ 3.2 mV
• Static insulating material application in cold
  -60 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Length
  57.8 mm
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section AWG min.
  26
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  2.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  800 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test turns
  135
• Tensile test result
  Test passed
Result of temperature-rise test
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
5.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal current IN
0.5 A
Maximum power dissipation for nominal condition
0.77 W
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tractive force setpoint
60 N
Result of voltage-drop test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
55 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
2 conductors with same cross section, stranded min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Stripping length
9 mm
Tightening torque max
0.6 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
Connection in acc. with standard
CSA
ECLASS 11.0
27141126
ECLASS 6.0
27141100
ETIM 3.0
EC000902
ETIM 7.0
EC000902
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Open side panel
Yes
Finger protection
guaranteed
Surge voltage test setpoint
9.8 kV
Conductor cross section tensile test
4 mm²
Setpoint
1 N
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Number of connections
2
Color
gray
Degree of pollution
3
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Conductor cross section flexible min.
0.14 mm²
2 conductors with same cross section, solid max.
1.5 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Connection method
Screw connection
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27141100
ECLASS 7.0
27141126
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.14 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141126
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 2.0
EC000902
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
2 conductors with same cross section, solid min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Tightening torque, min
0.5 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.0
27141100
ECLASS 9.0
27141126
ETIM 4.0
EC000902
ETIM 6.0
EC000902
UNSPSC 11
39121410
UNSPSC 20.0
39121410