3064030 Phoenix Contact Terminal Blocks
Part#:3064030
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Disconnect terminal block, With test socket screws for insertion of test plugs, nom. voltage: 500 V, nominal current: 20 A, connection method: Screw connection, cross section: 0.14 mm² - 6 mm², AWG: 26 - 10, length: 65.4 mm, width: 6.2 mm, color: gray, mo
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3064030 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Note The max. load current must not be exceeded by the total current of all connected conductors.Current and voltage are determined by the plug used.
- Color gray
- Rated surge voltage 6 kV
- Insulating material group I
- Number of connections 4
- Nominal cross section 4 mm²
- Overvoltage category III
- Nominal voltage UN 500 V
- Finger protection guaranteed
- Result of power-frequency withstand voltage test Test passed
- Tight fit on carrier NS 32/NS 35
- Test spectrum Service life test category 2, bogie-mounted
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test duration per axis 5 h
- Height NS 35/7,5 47.5 mm
- Connection method Screw connection
- Conductor cross section solid min. 0.14 mm²
- Conductor cross section AWG max. 10
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- 2 conductors with same cross section, solid min. 0.14 mm²
- 2 conductors with same cross section, stranded min. 0.14 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141126
- ECLASS 4.1 27141100
- ECLASS 9.0 27141126
- UNSPSC 6.01 30211827
- UNSPSC 7.0901 39121424
- UNSPSC 18.0 39121410
- Potentials 1
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 1.02 W
- Nominal current IN 20 A (with 6 mm² conductor cross section)
- Surge voltage test setpoint 7.2 kV
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Number of shocks per direction 3
- Length 65.4 mm
- Tightening torque, min 0.6 Nm
- Connection in acc. with standard CSA
- Conductor cross section flexible max. 6 mm²
- Min. AWG conductor cross section, flexible 26
- 2 conductors with same cross section, solid max. 1.5 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27141100
- ECLASS 6.0 27141100
- ETIM 3.0 EC000886
- UNSPSC 11 39121424
- UNSPSC 21.0 39121410
- Number of levels 1
- Insulating material PA
- Degree of pollution 3
- Maximum load current 20 A (with 6 mm² conductor cross section)
- Shock protection test specification IEC 60529:2001-02
- Back of the hand protection guaranteed
- Power frequency withstand voltage setpoint 1.89 kV
- Bending test turns 135
- Acceleration 30g
- Shock form Semi-sinusoidal
- Width 6.2 mm
- Height NS 35/15 55 mm
- Stripping length 9 mm
- Conductor cross section AWG min. 26
- Conductor cross section flexible min. 0.14 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Internal cylindrical gage A4
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- ECLASS 10.0.1 27141126
- ECLASS 7.0 27141126
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121424
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Open side panel Yes
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Ageing test for screwless modular terminal block temperature cycles 192
- ASD level 6.12 (m/s2)2/Hz
- Shock duration 18 ms
- End cover width 2.2 mm
- Screw thread M3
- Tightening torque max 0.8 Nm
- Conductor cross section solid max. 6 mm²
- Max. AWG conductor cross section, flexible 10
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.14 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 5.1 27141100
- ETIM 2.0 EC000886
- ETIM 6.0 EC000902
- ETIM 7.0 EC000902
- UNSPSC 19.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
