2904608 Phoenix Contact AC/DC Power Supplies

2904608 Product Details

• Width
  50 mm
• Depth with alternative assembly
  53 mm
• Ambient temperature (start-up type tested)
  -40 °C
• Dielectric strength maximum
  300 V AC 60 s
• Nominal power consumption
  221 VA
• Recommended breaker for input protection
  10 A ... 16 A (Characteristic B, C, D, K or comparable)
• Nominal output voltage
  12 V DC
• Dynamic Boost (IDyn.Boost)
  20 A (5 s)
• Connection in series
  yes
• Net weight
  1 kg
• Insulation voltage input/output
  4 kV AC (type test)
• Connection method
  Push-in connection
• Stripping length
  8 mm
• Standard - Electrical safety
  IEC 61010-2-201 (SELV)
• Standard – Safety extra-low voltage
  IEC 61010-1 (SELV)
• Electromagnetic compatibility
  Conformance with EMC Directive 2014/30/EU
• Harmonic currents
  EN 61000-3-2
• Frequency range
  50 Hz ... 60 Hz
• Test field strength
  110 A/m
• Signal
  4 kV (Test Level 4 - asymmetrical)
Voltage
2.5 kV
Frequency
50 Hz
Voltage dip
0 %
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 2)
10 MHz
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27040701
Height
130 mm
Installation distance top/bottom
50 mm / 50 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of pollution
2
Current consumption
2.4 A (100 V AC)
Input fuse
8 A (slow-blow, internal)
Protective circuit/component
Varistor, gas-filled surge arrester
Static Boost (IStat.Boost)
17.5 A
Derating
> 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
≤ 25 V DC
Maximum power dissipation in no-load condition
< 4 W (120 V AC)
Efficiency
typ. 91.2 % (120 V AC)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
Conducted noise emission
EN 55016
Noise emission
EN 55016
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Additional text
Test Level 2
Test level 1
15 Hz 150 Hz (Test Level 4)
Damped oscillating magnetic field
EN 61000-4-10
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ETIM 7.0
EC002540
Width with alternative assembly
122 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
≤ 5000 m (> 2000 m, observe derating)
AC frequency range
50 Hz ... 60 Hz -10 % ... +10 %
Selective Fuse Breaking (ISFB)
60 A (15 ms)
Residual ripple
< 70 mVPP (with nominal values)
Power loss nominal load max.
< 18 W (120 V AC)
Insulation voltage input / PE
3.5 kV AC (type test)
Insulation voltage output / PE
0.5 kV DC (type test)
Conductor cross section AWG min.
24
EMC requirements for noise immunity
EN 61000-6-1
Standard - Safety of transformers
EN 61558-2-16
CSA
CAN/CSA-C22.2 No. 60950-1-07
Flicker
EN 61000-3-3
Fast transients (burst)
EN 61000-4-4
Output
0.5 V (Test Level 2 - symmetrical)
I/O/S
asymmetrical
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 11.0
27040701
Height with alternative assembly
130 mm
Degree of protection
IP20
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Nominal input voltage range
100 V AC ... 240 V AC
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Inrush current
typ. 15 A (at 25 °C)
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Environmental protection directive
RoHS Directive 2011/65/EU
Protection class
I
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise emission
EN 61000-6-3
Rail applications
EN 50121-3-2
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Electrostatic discharge
EN 61000-4-2
Input
2 kV (Test Level 4 - symmetrical)
Power frequency magnetic field
EN 61000-4-8
Pulse-shape magnetic field
EN 61000-4-9
Test level 4
15 kHz 150 kHz (Test Level 4)
Attenuated oscillating wave
EN 61000-4-18
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
China RoHS
Environmentally Friendly Use Period = 25;
Depth
125 mm
Installation distance right/left
5 mm / 5 mm
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Discharge current to PE
< 3.5 mA
Mains buffering time
typ. 55 ms (120 V AC)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
12 V DC ... 15 V DC (constant capacity)
Nominal output current (IN)
15 A
Connection in parallel
Yes, for redundancy and increased capacity
Protection against overvoltage at the output (OVP)
≤ 18 V DC
Output power
180 W
Typical response time
300 ms (from SLEEP MODE)
MTBF (IEC 61709, SN 29500)
> 1196000 h (25 °C)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section solid max.
1 mm²
Conductor cross section AWG max.
16
EMC requirements, power plant
IEC 61850-3
Standard - Safe isolation
IEC 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
UL approvals
UL Listed UL 508
Discharge in air
15 kV (Test Level 4)
Contact discharge
8 kV (Test Level 4)
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
ETIM 6.0
EC002540

Product condition