2904622 Phoenix Contact AC/DC Power Supplies

2904622 Product Details

• Width with alternative assembly
  122 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
• Climatic class
  3K3 (in acc. with EN 60721)
• AC frequency range
  50 Hz ... 60 Hz -10 % ... +10 %
• Mains buffering time
  typ. 33 ms (3x 400 V AC)
• Nominal output voltage
  24 V DC
• Connection in parallel
  Yes, for redundancy and increased capacity
• Connection in series
  yes
• Typical response time
  300 ms (from SLEEP MODE)
• Environmental protection directive
  RoHS Directive 2011/65/EU
• Protection class
  I
• Connection method
  Push-in connection
• Stripping length
  8 mm
• Low Voltage Directive
  Conformance with Low Voltage Directive 2014/35/EC
• Flicker
  EN 61000-3-3
• Frequency range
  50 Hz ... 60 Hz
• I/O/S
  asymmetrical
• Width
  70 mm
• Installation distance top/bottom
  50 mm / 50 mm
• Degree of pollution
  2
Current consumption
3x 0.99 A (400 V AC)
Protective circuit/component
Varistor, gas-filled surge arrester
Dynamic Boost (IDyn.Boost)
30 A (5 s)
Selective Fuse Breaking (ISFB)
120 A (15 ms)
Output power
480 W
MTBF (IEC 61709, SN 29500)
> 985000 h (25 °C)
Assembly instructions
alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Conductor cross section AWG min.
24
EMC requirements for noise emission
EN 61000-6-3
Standard - Safety of transformers
IEC 61558-2-16 pending
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Mains variation/undervoltage
SEMI F47-0706, EN 61000-4-11
CSA
CAN/CSA-C22.2 No. 60950-1-07
SIQ
BG (type approved)
DNV GL noise radiation
Class B
Discharge in air
15 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Test level 4
15 kHz 150 kHz (Test Level 4)
Attenuated oscillating wave
EN 61000-4-18
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242200
ECLASS 7.0
27049002
UNSPSC 21.0
39121004
Height
130 mm
Depth with alternative assembly
73 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Nominal power consumption
541 VA
Recommended breaker for input protection
3x 4 A ... 20 A (Characteristic B, C or comparable)
Nominal output current (IN)
20 A
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Residual ripple
< 60 mVPP (with nominal values)
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid max.
1 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
UL approvals
UL Listed UL 508
Shipbuilding approval
DNV GL, PRS, BV, LR, ABS
Harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
Voltage dip
0 %
Test level 1
15 Hz 150 Hz (Test Level 4)
Test level 5
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Input, output (test level 2)
10 MHz
Signals (test level 2)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
ECLASS 11.0
27040701
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
Height with alternative assembly
130 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Degree of protection
IP20
Discharge current to PE
< 3.5 mA
Power factor (cos phi)
0.94
Static Boost (IStat.Boost)
25 A
Feedback voltage resistance
≤ 35 V DC
Maximum power dissipation in no-load condition
< 7 W (400 V AC)
Efficiency
typ. 93.9 % (400 V AC)
Insulation voltage input / PE
3.5 kV AC (type test)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
16
EMC requirements, power plant
IEC 61850-3
Standard - Electrical safety
IEC 61010-2-201 (SELV)
Standard - power supply devices for low voltage with DC output
EN 61204-3
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Conducted noise emission
EN 55016
DNV GL conducted interference
Class A
Test field strength
110 A/m
Output
1 kV (Test Level 3 - symmetrical)
Voltage
2.5 kV
Pulse-shape magnetic field
EN 61000-4-9
Asymmetrical conducted disturbance variables
EN 61000-4-16
Test level 6
16.7 Hz 50 Hz 60 Hz (Test Level 4)
Signals (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
China RoHS
Environmentally Friendly Use Period = 25;
ECLASS 6.0
27049000
UNSPSC 13.2
39121004
Depth
125 mm
Installation distance right/left
5 mm / 5 mm
Ambient temperature (start-up type tested)
-40 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Input voltage range
3x 400 V AC ... 500 V AC -20 % ... +10 %
Nominal input voltage range
3x 400 V AC ... 500 V AC
Inrush current
typ. 2 A (at 25 °C)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
24 V DC ... 29.5 V DC (constant capacity)
Derating
> 60 °C ... 70 °C (2.5%/K)
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Net weight
1.1 kg
Power loss nominal load max.
< 32 W (400 V AC)
Insulation voltage output / PE
0.5 kV DC (type test)
Mounting position
horizontal DIN rail NS 35, EN 60715
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
1.5 mm²
HART FSK Physical Layer Test Specification Compliance
Output voltage UOut compliant
Standard - Safe isolation
IEC 61558-2-16 pending
Rail applications
EN 50121-3-2
Noise emission
EN 55016
Contact discharge
8 kV (Test Level 4)
Additional text
Test Level 2
Input
2 kV (Test Level 4 - symmetrical)
Signal
1 kV (Test Level 2 - asymmetrical)
Frequency
50 Hz
Number of periods
0,5 / 1 / 5 / 50 / 250 periods
Test level 3
1.5 kHz 15 kHz (Test Level 4)
Input, output (test level 3)
100 kHz 1 MHz (Test Level 3 - asymmetrical)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 5.0
27242200
ETIM 7.0
EC002540
UNSPSC 18.0
39121004
Power frequency magnetic field
EN 61000-4-8
Damped oscillating magnetic field
EN 61000-4-10
Test level 2
150 Hz 1.5 kHz (Test Level 4)
Input, output (test level 1)
100 kHz 1 MHz (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27040701
UNSPSC 19.0
39121004

Product condition