2904607 Phoenix Contact AC/DC Power Supplies

2904607 Product Details

• Climatic class
  3K3 (in acc. with EN 60721)
• Current consumption
  1 A (100 V AC)
• Protective circuit/component
  Varistor
• Dynamic Boost (IDyn.Boost)
  12.75 A (≤ 60 °C (5 s))
• Feedback voltage resistance
  ≤ 25 V DC
• Typical response time
  300 ms
• Net weight
  0.3 kg
• Connection method
  Push-in connection
• Conductor cross section AWG min.
  24
• SIQ
  CB-Scheme (IEC 61010-1, IEC 61010-2-201)
• Noise emission
  EN 55016
• Contact discharge
  8 kV (Test Level 4)
• Frequency range
  50 Hz ... 60 Hz
• Output
  1 kV (Test Level 3 - symmetrical)
• Surge voltage load (surge)
  EN 61000-4-5
• Frequency
  60 Hz
• Asymmetrical conducted disturbance variables
  EN 61000-4-16
• Installation distance right/left (active, passive)
  0 mm / 0 mm (POut ≤50 %)
• Installation distance top/bottom (active, passive)
  30 mm / 30 mm (POut ≤50 %)
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Dielectric strength maximum
300 V AC 60 s
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C or comparable)
Nominal output voltage
12 V DC
Connection in series
yes
Maximum power dissipation in no-load condition
< 0.6 W (230 V AC)
Efficiency
typ. 91.5 % (120 V AC)
MTBF (IEC 61709, SN 29500)
> 1221000 h (25 °C)
Stripping length
10 mm
Standard - Safe isolation
IEC 61558-2-16
Conducted noise emission
EN 55016
Discharge in air
15 kV (Test Level 4)
Width
45 mm
Installation distance right/left (passive)
5 mm / 5 mm (POut ≥50% )
Degree of protection
IP20
Ambient temperature (start-up type tested)
-40 °C
Degree of pollution
2
Discharge current to PE
< 0.25 mA (264 V AC, 60 Hz)
Input fuse
3.15 A (slow-blow, internal)
Type of protection
Transient surge protection
Protection against overvoltage at the output (OVP)
≤ 18 V DC
Protection class
II
Conductor cross section flexible min.
0.2 mm²
Standard - Safety of transformers
EN 61558-2-16
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Flicker
EN 61000-3-3
Test field strength
1000 A/m
Voltage
1 kV (symmetrical)
Voltage dips
EN 61000-4-11
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
ECLASS 10.0.1
27040701
ECLASS 7.0
27049002
UNSPSC 21.0
39121004
Depth
90 mm
Installation distance top/bottom (passive)
30 mm / 30 mm (POut ≥50% )
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Frequency range (fN)
50 Hz ... 60 Hz -10 % ... +10 %
Inrush current
typ. 11.4 A (at 25 °C)
Setting range of the output voltage (USet)
12 V DC ... 15 V DC (constant capacity)
Control deviation
< 0.3 % (Static load change 10 % ... 90 %)
Output power
90 W
Power loss nominal load max.
< 8.1 W (120 V AC)
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Comments
Criterion A
Conducted interference
EN 61000-4-6
Additional text
Test Level 2
Pulse-shape magnetic field
EN 61000-4-9
Attenuated oscillating wave
EN 61000-4-18
ECLASS 5.1
27242213
Height
106 mm
Installation distance right/left (active)
15 mm / 15 mm (POut ≥50% )
Installation distance top/bottom (active)
30 mm / 30 mm (POut ≥50% )
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Installation height
≤ 5000 m (> 2000 m, observe derating)
Nominal power consumption
96.3 VA
Mains buffering time
typ. 48 ms (120 V AC)
Nominal output current (IN)
7.5 A
Connection in parallel
Yes, for redundancy and increased capacity
Residual ripple
< 35 mVPP (with nominal values)
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
UL approvals
UL Listed UL 61010-1
Harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (symmetrical)
Fast transients (burst)
EN 61000-4-4
Power frequency magnetic field
EN 61000-4-8
Voltage dip
0 %
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 2)
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 11.0
27040701
ETIM 6.0
EC002540
UNSPSC 20.0
39121004
Signal
0.5 kV (Test Level 2 - symmetrical)
I/O/S
asymmetrical
Number of periods
0.5 / 1 / 5 / 50 periods
Test level 1
16.67 Hz 50 Hz 60 Hz 150 Hz 180 Hz (Test Level 3)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
ECLASS 9.0
27040701
UNSPSC 18.0
39121004
Criterion A
Normal operating behavior within the specified limits.
REACh SVHC
Lead 7439-92-1
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 19.0
39121004
UNSPSC 13.2
39121004

Product condition