2904372 Phoenix Contact AC/DC Power Supplies

2904372 Product Details

• Voltage dips
  EN 61000-4-11
• Width
  45 mm
• Depth
  125 mm
• Installation distance top/bottom
  30 mm / 30 mm
• Ambient temperature (start-up type tested)
  -25 °C
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Frequency range (fN)
  50 Hz ... 60 Hz 10 %
• Nominal power consumption
  260 VA
• Current consumption
  2.69 A (100 V AC)
• Power factor (cos phi)
  0.99
• Nominal output current (IN)
  10 A (-25 °C ... 55 °C)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Residual ripple
  < 50 mVPP (with nominal values)
• Power loss nominal load max.
  < 18.8 W
• Nominal output voltage
  24 V DC ±1 %
• Connection in series
  No
• Protection against overvoltage at the output (OVP)
  ≤ 35 V DC
• Maximum power dissipation in no-load condition
  < 1.1 W
• Protection class
  I (in closed control cabinet)
• Conductor cross section solid min.
  0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Standard - Safety of transformers
EN 61558-2-16
Mains variation/undervoltage
EN 61000-4-11
Electrostatic discharge
EN 61000-4-2
Test field strength
10 V/m (Test Level 3)
Output
1 kV (Test Level 2 - symmetrical)
Installation distance right/left
0 mm / 0 mm
Ambient temperature (operation)
-25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Climatic class
3K3 (in acc. with EN 60721)
Degree of pollution
2
Inrush current
< 80 A (typical)
Mains buffering time
> 10 ms (120 V AC)
Input fuse
5 A (slow-blow, internal)
Setting range of the output voltage (USet)
24 V DC ... 28 V DC ±1 %
Control deviation
change in load, static 10 % ... 90 %
Insulation voltage input/output
4 kV AC (type test)
Assembly instructions
alignable: 0 mm horizontally, 30 mm vertically
Connection method
Screw connection
EMC requirements for noise emission
EN 61000-6-3
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (Test Level 3 - symmetrical)
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 5.0
27049000
ECLASS 5.1
27049000
UNSPSC 18.0
39121004
Type of protection
Transient surge protection
Feedback voltage resistance
< 35 V DC
Output power
240 W
Efficiency
typ. 90 % (120 V AC)
Housing material
Aluminum / polycarbonate
Conductor cross section flexible max.
2.5 mm²
Screw thread
M3
Standard - Safe isolation
DIN VDE 0100-410
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Frequency range
0.15 MHz ... 80 MHz
Conducted interference
EN 61000-4-6
ECLASS 6.0
27049000
ETIM 4.0
EC000599
UNSPSC 19.0
39121004
Height
130 mm
Degree of protection
IP20
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Nominal input voltage range
100 V AC ... 240 V AC
Input voltage range
85 V AC ... 264 V AC (< 95 V AC Derating 1 %/V)
AC frequency range
50 Hz ... 60 Hz
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Protective circuit/component
Varistor
Derating
55 °C ... 70 °C (2.5%/K)
Typical response time
< 1 s
Net weight
0.66 kg
MTBF (IEC 61709, SN 29500)
> 641000 h (40 °C)
Conductor cross section flexible min.
0.2 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
CSA
CAN/CSA-C22.2 No. 60950-1-07
Discharge in air
8 kV (Test Level 3)
Fast transients (burst)
EN 61000-4-4
UNSPSC 21.0
39121004
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 7.0
27049002
UNSPSC 20.0
39121004
Mounting position
horizontal DIN rail NS 35, EN 60715
Stripping length
8 mm
UL approvals
UL/C-UL listed UL 508
Contact discharge
6 kV (Test Level 3)
ECLASS 4.1
27040700
ETIM 6.0
EC002540
Voltage
10 V (Test Level 3)
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 13.2
39121004
Conductor cross section solid max.
2.5 mm²
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
ECLASS 4.0
27040700
ECLASS 9.0
27040701
Comments
Criterion A
Surge voltage load (surge)
EN 61000-4-5
ECLASS 11.0
27040701
ETIM 7.0
EC002540

Product condition