2902965 Phoenix Contact Relays

2902965 Product Details

• Nominal input voltage UN
  5 V DC
• Switching threshold "1" signal in reference to UN
  > 0.5
• Typical response time
  1 µs
• Transmission frequency
  100 kHz
• Quiescent current
  8.5 mA
• Output circuit
  3-conductor push-pull, ground referenced
• Connection method
  Screw connection
• Rated insulation voltage
  50 V DC
• Insulation
  Basic insulation
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 5.0
  27371000
• ETIM 2.0
  EC001504
• UNSPSC 6.01
  30211916
• UNSPSC 19.0
  39122326
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Depth
  86 mm
• Ambient temperature (storage/transport)
  -25 °C ... 75 °C
• Degree of protection
  IP20
• Surge voltage protection
  > 35 V
• Designation
  Corrosive gas test
Test voltage
2.5 kVrms (50 Hz, 1 min., input/output)
Screw thread
M3
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Rated surge voltage
0.5 kV
Overvoltage category
II
ECLASS 7.0
27371604
ETIM 3.0
EC001504
UNSPSC 7.0901
39121542
UNSPSC 18.0
39122326
Width
6.2 mm
Input voltage range in reference to UN
0.5 ... 1.2
Switching threshold "0" signal in reference to UN
< 0.3
Typical turn-off time
2 µs
Operating voltage display
Yellow LED
Output voltage range
4 V DC ... 18 V DC
Assembly instructions
In rows with zero spacing
Connection name
Output side
Conductor cross section AWG
26 ... 14
Pollution degree
2
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27371604
ETIM 6.0
EC001504
UNSPSC 12.01
39121542
UNSPSC 21.0
39122326
Height
80 mm
Ambient temperature (operation)
-20 °C ... 60 °C
Input voltage range
2.5 V DC ... 6 V DC
Power dissipation for nominal condition
0.04 W
Voltage drop at max. limiting continuous current
< 1.2 V
Operating mode
100% operating factor
Conductor cross section solid
0.14 mm² ... 2.5 mm²
Identification
ISA-S71.04. G3 Harsh Group
ECLASS 10.0.1
27371604
ECLASS 4.1
27371100
ECLASS 9.0
27371604
ETIM 4.0
EC001504
UNSPSC 13.2
39122326
UNSPSC 20.0
39122326
Typical input current at UN
8 mA
Type of protection
Reverse polarity protection
Limiting continuous current
50 mA
Mounting position
any
Stripping length
8 mm
Standards/regulations
DIN EN 50178
ECLASS 4.0
27371100
ECLASS 5.1
27371000
ECLASS 6.0
27371600
ETIM 7.0
EC001504
UNSPSC 11
39121542

Product condition