2902991 Phoenix Contact AC/DC Power Supplies

Product Details

• Depth
  84 mm
• Height
  90 mm
• Degree of protection
  IP20
• Degree of pollution
  2
• Nominal power consumption
  72.1 VA
• Recommended breaker for input protection
  6 A ... 16 A (Characteristics B, C, D, K)
• Nominal output current (IN)
  1.25 A (-25 °C ... 55 °C)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Residual ripple
  < 60 mVPP (with nominal values)
• Output power
  30 W
• Assembly instructions
  alignable: 0 mm horizontally, 30 mm vertically
• Housing material
  Polycarbonate
• Conductor cross section flexible min.
  0.2 mm²
• Screw thread
  M3
• EMC requirements for noise immunity
  EN 61000-6-1
• EMC requirements for noise emission
  EN 61000-6-3
• Width
  22.5 mm
• Ambient temperature (operation)
  -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K)
• Nominal input voltage range
  100 V AC ... 240 V AC
• Current consumption
  0.8 A (100 V AC)
Inrush current
< 20 A (typical)
Power factor (cos phi)
0.47
Derating
55 °C ... 70 °C (2.5%/K)
Feedback voltage resistance
< 35 V DC
Typical response time
< 1 s
Insulation voltage input/output
4 kV AC (type test)
Efficiency
typ. 87 % (120 V AC)
Foot latch material
POM (Polyoxymethylen)
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
2.5 mm²
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations
EN 50178/VDE 0160 (PELV)
Standard - Electrical safety
IEC 62368-1/VDE 0805 (SELV)
UL approvals
UL/C-UL listed UL 508
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electrostatic discharge
EN 61000-4-2
Fast transients (burst)
EN 61000-4-4
Voltage dips
EN 61000-4-11
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 5.0
27049000
ECLASS 6.0
27049000
Installation distance right/left
0 mm / 0 mm
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Climatic class
3K3 (in acc. with EN 60721)
Input voltage range
85 V AC ... 264 V AC
Installation distance top/bottom
30 mm / 30 mm
Ambient temperature (storage/transport)
-40 °C ... 85 °C
AC frequency range
50 Hz ... 60 Hz
Frequency range (fN)
50 Hz ... 60 Hz 10 %
Type of protection
Transient surge protection
Protective circuit/component
Varistor
Nominal output voltage
24 V DC ±1 %
Protection against overvoltage at the output (OVP)
≤ 35 V DC
Maximum power dissipation in no-load condition
< 0.3 W
Power loss nominal load max.
< 5 W
Mounting position
horizontal DIN rail NS 35, EN 60715
Connection method
Screw connection
Stripping length
8 mm
Standard - Safety of transformers
EN 61558-2-16
Standard - Safe isolation
DIN VDE 0100-410
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Contact discharge
6 kV (Test Level 3)
Frequency range
10 kHz ... 80 MHz
Comments
Criterion A
Output
1 kV (Test Level 2 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
Voltage
10 V (Test Level 3)
ECLASS 5.1
27049000
ECLASS 4.1
27040700
ETIM 4.0
EC000599
UNSPSC 6.01
30211502
UNSPSC 12.01
39121004
UNSPSC 21.0
39121004
Control deviation
< 1 % (change in load, static 10 % ... 90 %)
Net weight
0.15 kg
Protection class
II (in closed control cabinet)
MTBF (IEC 61709, SN 29500)
> 1158000 h (40 °C)
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Conductor cross section AWG max.
14
Standard – Safety extra-low voltage
IEC 62368-1 (SELV) und EN 60204-1 (PELV)
Mains variation/undervoltage
EN 61000-4-11
Low Voltage Directive
Conformance with Low Voltage Directive 2014/35/EC
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Ambient temperature (start-up type tested)
-40 °C
CSA
CAN/CSA-C22.2 No. 60950-1-07
Electromagnetic HF field
EN 61000-4-3
ECLASS 11.0
27040701
ETIM 3.0
EC001039
UNSPSC 18.0
39121004
Mains buffering time
> 25 ms (120 V AC)
Discharge in air
8 kV (Test Level 3)
Conducted interference
EN 61000-4-6
ECLASS 4.0
27040700
UNSPSC 11
39121004
Input fuse
2 A (slow-blow, internal)
Connection in series
yes
ECLASS 9.0
27040701
UNSPSC 13.2
39121004
UNSPSC 20.0
39121004
China RoHS
Environmentally Friendly Use Period = 25;
ETIM 6.0
EC002540
UNSPSC 7.0901
39121004
UNSPSC 19.0
39121004
Test field strength
10 V/m (Test Level 3)
Input
2 kV (Test Level 3 - symmetrical)
ECLASS 7.0
27049002
ETIM 7.0
EC002540