2902037 Phoenix Contact Electrical Measuring & Monitoring Instruments

2902037 Product Details

• Height
  109.81 mm
• Width
  6.2 mm
• Maximum altitude
  ≤ 2000 m
• Current input signal
  0 mA ... 20 mA (via DIP switch)
• Number of outputs
  1
• Load/output load current output
  ≤ 600 Ω (at 20 mA)
• Connection method
  Screw connection
• Power consumption
  ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
• Maximum transmission error
  ≤ 0.1 % (of final value)
• ETIM 4.0
  EC002653
• UNSPSC 6.01
  30211502
• Utilization restriction
  EMC: class A product, see manufacturer's declaration in the download area
• Ambient temperature (storage/transport)
  -40 °C ... 85 °C
• Permissible humidity (operation)
  5 % ... 95 % (non-condensing)
• Input resistance current input
  approx. 63 Ω (+0.7 V for test diode)
• Ripple
  < 20 mVPP (at 600 Ω)
• Nominal supply voltage
  24 V DC
• Screw thread
  M3
• Maximum temperature coefficient
  0.01 %/K
• ECLASS 9.0
  27210120
UNSPSC 11
39121004
UNSPSC 21.0
39121008
Depth
119.2 mm
Noise immunity
EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Degree of protection
IP20 (not assessed by UL)
max. input voltage
33 V
Voltage output signal
0 V ... 5 V (via DIP switch)
Load/output load voltage output
≥ 10 kΩ
Short-circuit current
< 32 mA
Stripping length
10 mm
No. of channels
1
ETIM 7.0
EC002653
ETIM 6.0
EC002653
UNSPSC 19.0
39121008
Input resistance of voltage input
> 1000 kΩ
Current output signal
0 mA ... 20 mA (via DIP switch)
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Conductor cross section solid
0.2 mm² ... 1.5 mm² (with ferrule)
ECLASS 6.0
27210100
Ambient temperature (operation)
-40 °C ... 70 °C
UNSPSC 13.2
39121008
UNSPSC 20.0
39121008
Number of inputs
1
Max. input current
24 mA
Conductor cross section AWG
24 ... 12 (flexible)
Torque
0.5 Nm ... 0.6 Nm
Temperature coefficient, typical
0.01 %/K
Color
gray
UNSPSC 7.0901
39121004
UNSPSC 12.01
39121004
Configurable/programmable
Yes
Voltage input signal
0 V ... 5 V (via DIP switch)
Max. output current
22 mA
Typical current consumption
25 mA (Current output, at 24 V DC incl. load)
Test voltage, input/output/supply
3 kV (50 Hz, 1 min.)
Identification
UL 508 Listed
REACh SVHC
Lead 7439-92-1
Noise emission
EN 61000-6-4
ECLASS 11.0
27210120
ECLASS 4.1
27210100
Certificate
DNV GL TAA00002UA
Enclosure
Required protection according to the Rules shall be provided upon installation on board
ECLASS 5.0
27210100
ECLASS 7.0
27210120
Mounting position
any
Temperature
B
EMC
A
ECLASS 10.0.1
27210120
Standards/regulations
EN 61000-4-6
Humidity
B
Vibration
A
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.0
27210100
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 2
Overvoltage category
II
Assembly instructions
The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 2
Housing material
PBT
Designation
Shipbuilding approval
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 2
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
Electromagnetic compatibility
Conformance with EMC directive
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Protective circuit
Transient protection
Step response (10-90%)
< 8.5 ms (with 30 Hz filter)
Limit frequency (3 dB)
30 Hz (via DIP switch)
Degree of pollution
2
Rated insulation voltage
300 V (effective)
ECLASS 5.1
27210100
UNSPSC 18.0
39121008

Product condition