2902031 Phoenix Contact Electrical Measuring & Monitoring Instruments
Part#:2902031
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Measuring & Monitoring Instruments that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 2902031 Phoenix Contact price in the box on the right side or send a quick quote.
2902031 Product Details
- Ambient temperature (operation) -40 °C ... 70 °C
- Voltage input signal 0 V ... 10 V (via DIP switch)
- Input resistance of voltage input > 120 kΩ
- Min. switching current 100 µA
- Width 6.2 mm
- Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
- Max. input current 24 mA
- Maximum switching voltage 30 V DC
- Load current maximum 100 mA
- Typical current consumption 27 mA (12 V DC)
- Torque 0.5 Nm ... 0.6 Nm
- Overvoltage category II
- Mounting position any
- UL, USA/Canada UL 508 Listed
- Identification UL 508 Listed
- Vibration A
- Permissible humidity (operation) 5 % ... 95 % (non-condensing)
- max. input voltage 12 V
- Output name Frequency output / switching output
- Frequency output: signal 0 Hz ... 10 kHz (via DIP switch)
- Step response (0–99%) 120 ms (15 Hz sample rate)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Conductor cross section flexible 0.14 mm² ... 2.5 mm²
- No. of channels 1
- Degree of pollution 2
- Depth 119.2 mm
- Degree of protection IP20 (not assessed by UL)
- Current input signal 0 mA ... 20 mA (via DIP switch)
- Configurable/programmable Yes
- Input resistance current input approx. 50 Ω (+0.7 V for test diode)
- EMC A
- Minimum switching voltage 1 V DC
- Max. switching current 100 mA (30 V DC)
- Overrange/underrange Can be set (via software)
- Power consumption ≤ 350 mW (9.6 V DC)
- Conductor cross section solid 0.2 mm² ... 1.5 mm² (with ferrule)
- Utilization restriction EMC: class A product, see manufacturer's declaration in the download area
- Maximum altitude ≤ 2000 m
- Number of inputs 1
- Number of outputs 1
- Frequency output: min. load 4 mA ≤ (UL / RL) ≤ 100 mA
- Screw thread M3
- Electrical isolation Reinforced insulation in accordance with IEC 61010-1
- Rated insulation voltage 300 V (effective)
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2
- Certificate DNV GL TAA000021E
- ECLASS 10.0.1 27210120
- Nominal supply voltage 24 V DC
- Color gray
- PWM output: min. load 12 mA ≤ (UL / RL) ≤ 100 mA
- PWM output: signal 15.6 kHz (10 bits, via DIP switch)
- Connection method Screw connection
- Stripping length 10 mm
- Conformance CE-compliant
- ATEX II 3 G Ex nA IIC T4 Gc X
- DNV GL-Vibration A
- DNV GL-Enclosure Required protection according to the Rules shall be provided upon installation on board
- Conductor cross section AWG 24 ... 12 (flexible)
- Test voltage, input/output/supply 3 kV (50 Hz, 1 min.)
- Temperature B
- ECLASS 4.1 27210100
- UNSPSC 13.2 39121008
- UNSPSC 21.0 39121008
- ETIM 7.0 EC002653
- Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
- REACh SVHC Lead 7439-92-1
- ECLASS 4.0 27210100
- ECLASS 7.0 27210120
- DNV GL-Temperature B
- DNV GL-EMC A
- Electromagnetic compatibility Conformance with EMC directive
- DNV GL-Humidity B
- Designation Shipbuilding approval
- Temperature coefficient, typical 0.01 %/K
- ECLASS 9.0 27210120
- UNSPSC 7.0901 39121008
- Housing material PBT
- ETIM 4.0 EC002653
- UNSPSC 11 39121008
- Noise emission EN 61000-6-4
- Humidity B
- UNSPSC 6.01 30211506
- Maximum temperature coefficient < 0.01 %/K
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
- ECLASS 5.0 27210100
- ECLASS 6.0 27210100
- UNSPSC 18.0 39121008
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
- Enclosure Required protection according to the Rules shall be provided upon installation on board
- ECLASS 5.1 27210100
- UNSPSC 19.0 39121008
- Height 109.81 mm
- China RoHS Environmentally Friendly Use Period = 50 years
- ETIM 6.0 EC002653
- UNSPSC 20.0 39121008
- ECLASS 11.0 27210120
- UNSPSC 12.01 39121008
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
2902031
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨