1211202 Phoenix Contact Electrical Wires & Cables
Part#:1211202
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
About the product: CHARX connect, Vehicle charging inlet, Locking actuator right, For charging with alternating current (AC) and with direct current (DC), For installation in electric vehicles (EV), CCS type 2, Combined Charging System, IEC 62196-2, IEC 62196-3, 200 A / 100
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Electrical Wires & Cables that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 1211202 Phoenix Contact price in the box on the right side or send a quick quote.
1211202 Product Details
- Charging standard CCS type 2
- Width 108 mm
- Design Generation 4
- Height 140.25 mm
- Max. altitude 4000 m (above sea level)
- Rated voltage for power contacts 250 V AC
- Temperature measurement DC contacts: 2x PT1000 (DIN EN 60751)
- Mounting position of the locking actuator Right-side
- Housing color black
- Flammability rating V0
- Locking type Locking in the inserted state with a locking mechanism
- Outer sheath, material PVC
- Max. dwell time with reverse current 1 s
- Recommended adaptation time 600 ms
- Lock recognition available
- Tolerance at the sensor with the recommended measured current ±5K
- Temperature range -40 °C ... 130 °C
- ECLASS 11.0 27144706
- Application For charging with alternating current (AC) and with direct current (DC)
- Bore dimensions 117.65 mm x 90 mm, 117.65 mm x 83 mm
- Ambient temperature (operation) -30 °C ... 50 °C
- Maximum charging power 200 kW
- Rated voltage for signal contacts 30 V AC
- Resistor coding 4.7 kΩ (between PE and PP)
- Restrictions to mounting position Only 0 to 90 degree frontal inclination possible, see figure
- Required mounting screws M6
- ECLASS 9.0 27144706
- Type Locking actuator right
- Charging mode Mode 2, 3, 4
- Note A protective cap is supplied as standard for the DC and AC contacts.
- Depth 128.4 mm
- Type of charging current DC, AC 1-phase
- Number of power contacts 5 (L1, N, PE, DC+, DC-)
- Rated current for signal contacts 2 A
- Insertion force < 100 N
- Insertion/withdrawal cycles > 10000
- Design line Generation 4
- Material surface of contacts Ag
- Cable resistance ≤ 37.1 Ω/km
- Cable weight 7 kg/km
- Number of positions of theconnectors 4
- Possible power supply range at the motor 22 V ... 26 V
- Cable length 0.5 m
- Recommended measured current ≤ 1 mA (Umax= 16 V DC)
- Standards/regulations DIN EN 60751
- Note on the connection method Crimp connection, cannot be disconnected
- Conductor length 2 m (AC cables)
- Ambient temperature (storage/transport) -40 °C ... 85 °C
- Number of phases 1
- Rated current of power contacts 32 A AC
- Type of signal transmission Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121
- Temperature monitoring AC contacts: PTC chain (DIN˽EN˽60738-1)
- Withdrawal force < 100 N
- Screws included in the scope of delivery none
- Material Plastic
- Cable structure 4 x 0.5 mm²
- External sheath, color Green-yellow
- Single wire, color black PP/CS
- Operating voltage 24 V (Typical power supply at the motor)
- Typical motor current for locking 0.05 A
- Service life insertion cycles > 10000 load cycles
- Mechanical emergency release available
- Resistance range 650 Ω ... 1450 Ω
- Degree of protection IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)
- Number of signal contacts 2 (CP, PP)
- Insulation resistance of neighboring contacts > 200 MΩ
- Mounting hole diameter 6.80 mm (ø)
- Customer variations On request
- External cable diameter 1.6 mm -0.2 mm
- Minimum bending radius 15 mm
- Reverse current of the motor max. 0.5 A
- Maximum voltage for locking detection 30 V
- Pause time after entry or exit path 3 s
- Type of sensor Pt 1000
- ECLASS 10.0.1 27144706
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
1211202
Select Qty:
Average response time: 11 minutes
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Relevant products
Do you have questions?
We’re here for you ✨