OQT350-R201-2EP-IO-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Mass
  approx. 44 g
• Optical face
  PMMA
• Connection
  4-pin, M8 x 1 connector, 90° rotatable
• Housing
  PC (Polycarbonate)
• Degree of protection
  IP67 / IP69 / IP69K
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Housing depth
  41.7 mm
• Housing height
  61.7 mm
• Light type
  modulated visible red light
• Housing width
  15 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Communication interface
  IEC 61131-9
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Product standard
  EN 60947-5-2
• Laser safety
  EN 60825-1:2014
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Light source
  laser diode
• Response time
  2.3 ms
Voltage drop
≤ 1.5 V DC
Switching frequency
217 Hz
Switching current
max. 100 mA , resistive load
Usage category
DC-12 and DC-13
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Switching voltage
max. 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Compatible master port type
A
Laser class
1
Protection class
III
SIO mode support
yes
No-load supply current
< 16 mA at 24 V supply voltage
IO-Link revision
1.1
Device profile
Identification and diagnosis, Smart Sensor type 0
Process data width
Process data input 2 Bit, Process data output 2 Bit
Device ID
0x111812 (1120274)
Min. cycle time
2.3 ms
Transfer rate
COM2 (38.4 kBit/s)
Interface type
IO-Link ( via C/Q = pin 4 )
Ripple
max. 10 %
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Control elements
Teach-In key
Operating voltage
10 ... 30 V DC
Opening angle
approx. 0.3 °
Diagnostic Coverage (DC)
0 %
Mission Time (TM)
20 a
MTTFd
560 a
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Ambient light limit
EN 60947-5-2 : 45000 Lux
Black-white difference (6 %/90 %)
< 2 %, ,
Pulse length
5.5 µs
Wave length
680 nm
max. pulse energy
< 40 nJ
Repetition rate
approx. 2.4 kHz
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Reference target
standard white, 100 mm x 100 mm
Adjustment range
100 ... 350 mm
Detection range
60 ... 350 mm
Detection range max.
40 ... 400 mm
Detection range min.
60 ... 100 mm

Related documents OQT350-R201-2EP-IO-V31-L Specs