OQT350-R200-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Housing
  PC (Polycarbonate)
• Degree of protection
  IP67 / IP69 / IP69K
• Optical face
  PMMA
• Mass
  approx. 45 g
• Cable length
  0.3 m
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Housing width
  15 mm
• Housing depth
  41.7 mm
• Housing height
  50.6 mm
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• EAC conformity
  TR CU 020/2011
• Laser safety
  EN 60825-1:2014
• Communication interface
  IEC 61131-9
• Product standard
  EN 60947-5-2
• Usage category
  DC-12 and DC-13
• Voltage drop
  ≤ 1.5 V DC
Switching voltage
max. 30 V DC
Response time
2.3 ms
Switching frequency
217 Hz
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching current
max. 100 mA , resistive load
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
SIO mode support
yes
Compatible master port type
A
Process data width
Process data input 2 Bit, Process data output 2 Bit
Min. cycle time
2.3 ms
Device ID
0x111802 (1120258)
Transfer rate
COM2 (38.4 kBit/s)
IO-Link revision
1.1
Device profile
Identification and diagnosis, Smart Sensor type 0
Ripple
max. 10 %
Interface type
IO-Link ( via C/Q = pin 4 )
Control elements
Teach-In key
No-load supply current
< 16 mA at 24 V supply voltage
Protection class
III
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Operating voltage
10 ... 30 V DC
Mission Time (TM)
20 a
Diagnostic Coverage (DC)
0 %
MTTFd
560 a
Ambient light limit
EN 60947-5-2 : 45000 Lux
Opening angle
approx. 0.3 °
Black-white difference (6 %/90 %)
< 2 %, ,
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Pulse length
5.5 µs
max. pulse energy
< 40 nJ
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Repetition rate
approx. 2.4 kHz
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Wave length
680 nm
Detection range min.
60 ... 100 mm
Light source
laser diode
Light type
modulated visible red light
Detection range max.
40 ... 400 mm
Adjustment range
100 ... 350 mm
Detection range
60 ... 350 mm
Reference target
standard white, 100 mm x 100 mm
Laser class
1

Related documents OQT350-R200-2EP-IO-0,3M-V1-L Specs