OQT350-R200-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Cable length
  2 m
• Optical face
  PMMA
• Housing
  PC (Polycarbonate)
• Connection
  2 m fixed cable
• Mass
  approx. 73 g
• Degree of protection
  IP67 / IP69 / IP69K
• Housing depth
  41.7 mm
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing height
  50.6 mm
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Housing width
  15 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Laser safety
  EN 60825-1:2014
• EAC conformity
  TR CU 020/2011
• Communication interface
  IEC 61131-9
• Product standard
  EN 60947-5-2
• Response time
  2.3 ms
• Switching voltage
  max. 30 V DC
Switching frequency
217 Hz
Usage category
DC-12 and DC-13
Switching current
max. 100 mA , resistive load
Voltage drop
≤ 1.5 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Compatible master port type
A
Switching type
The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
Process data width
Process data input 2 Bit, Process data output 2 Bit
SIO mode support
yes
Min. cycle time
2.3 ms
Transfer rate
COM2 (38.4 kBit/s)
Device profile
Identification and diagnosis, Smart Sensor type 0
IO-Link revision
1.1
Device ID
0x111802 (1120258)
No-load supply current
< 16 mA at 24 V supply voltage
Interface type
IO-Link ( via C/Q = BK )
Protection class
III
Mission Time (TM)
20 a
Ripple
max. 10 %
Control elements
Teach-In key
Diagnostic Coverage (DC)
0 %
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
MTTFd
560 a
Black-white difference (6 %/90 %)
< 2 %, ,
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Operating voltage
10 ... 30 V DC
Opening angle
approx. 0.3 °
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Repetition rate
approx. 2.4 kHz
max. pulse energy
< 40 nJ
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Pulse length
5.5 µs
Wave length
680 nm
Light source
laser diode
Detection range
60 ... 350 mm
Reference target
standard white, 100 mm x 100 mm
Detection range max.
40 ... 400 mm
Detection range min.
60 ... 100 mm
Light type
modulated visible red light
Adjustment range
100 ... 350 mm
Laser class
1
Note
LASER LIGHT , DO NOT STARE INTO BEAM

Related documents OQT350-R200-2EP-IO-L Specs