OQT350-R201-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Cable length
  2 m
• Mass
  approx. 83 g
• Degree of protection
  IP67 / IP69 / IP69K
• Connection
  2 m fixed cable
• Housing
  PC (Polycarbonate)
• Optical face
  PMMA
• Housing depth
  41.7 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing height
  61.7 mm
• Housing width
  15 mm
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Product standard
  EN 60947-5-2
• Response time
  2.3 ms
• Usage category
  DC-12 and DC-13
• Communication interface
  IEC 61131-9
• Laser safety
  EN 60825-1:2014
• Voltage drop
  ≤ 1.5 V DC
Switching frequency
217 Hz
Switching current
max. 100 mA , resistive load
Switching voltage
max. 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching type
The default setting is: C/Q - BK: NPN normally open, PNP normally closed, IO-Link, Q2 - WH: NPN normally open, PNP normally closed
IO-Link revision
1.1
Compatible master port type
A
SIO mode support
yes
Process data width
Process data input 2 Bit, Process data output 2 Bit
Min. cycle time
2.3 ms
Device profile
Identification and diagnosis, Smart Sensor type 0
Device ID
0x111812 (1120274)
Control elements
Teach-In key
Transfer rate
COM2 (38.4 kBit/s)
Interface type
IO-Link ( via C/Q = BK )
Ripple
max. 10 %
No-load supply current
< 16 mA at 24 V supply voltage
Protection class
III
Operating voltage
10 ... 30 V DC
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Diagnostic Coverage (DC)
0 %
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Mission Time (TM)
20 a
Ambient light limit
EN 60947-5-2 : 45000 Lux
MTTFd
560 a
Opening angle
approx. 0.3 °
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Black-white difference (6 %/90 %)
< 2 %, ,
max. pulse energy
< 40 nJ
Pulse length
5.5 µs
Repetition rate
approx. 2.4 kHz
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Wave length
680 nm
Detection range min.
60 ... 100 mm
Detection range
60 ... 350 mm
Reference target
standard white, 100 mm x 100 mm
Detection range max.
40 ... 400 mm
Laser class
1
Light source
laser diode
Adjustment range
100 ... 350 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Light type
modulated visible red light

Related documents OQT350-R201-2EP-IO-L Specs