OQT350-R200-2EP-IO-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Optical face
  PMMA
• Connection
  4-pin, M12 x 1 connector, 90° rotatable
• Degree of protection
  IP67 / IP69 / IP69K
• Mass
  approx. 37 g
• Housing
  PC (Polycarbonate)
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Housing depth
  41.7 mm
• Housing height
  50.6 mm
• Housing width
  15 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Compatible master port type
  A
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Response time
  2.3 ms
• Transfer rate
  COM2 (38.4 kBit/s)
• Communication interface
  IEC 61131-9
• Product standard
  EN 60947-5-2
Laser safety
EN 60825-1:2014
Switching frequency
217 Hz
EAC conformity
TR CU 020/2011
Voltage drop
≤ 1.5 V DC
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Usage category
DC-12 and DC-13
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Protection class
III
Device ID
0x111802 (1120258)
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
IO-Link revision
1.1
Device profile
Identification and diagnosis, Smart Sensor type 0
Operating voltage
10 ... 30 V DC
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
No-load supply current
< 16 mA at 24 V supply voltage
Ripple
max. 10 %
Diagnostic Coverage (DC)
0 %
Ambient light limit
EN 60947-5-2 : 45000 Lux
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Mission Time (TM)
20 a
Control elements
Teach-In key
MTTFd
560 a
Opening angle
approx. 0.3 °
Black-white difference (6 %/90 %)
< 2 %, ,
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
max. pulse energy
< 40 nJ
Wave length
680 nm
Repetition rate
approx. 2.4 kHz
Pulse length
5.5 µs
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Detection range min.
60 ... 100 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Detection range
60 ... 350 mm
Adjustment range
100 ... 350 mm
Light source
laser diode
Detection range max.
40 ... 400 mm
Reference target
standard white, 100 mm x 100 mm
Laser class
1
Light type
modulated visible red light

Related documents OQT350-R200-2EP-IO-V1-L Specs