OQT350-R201-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Cable length
  0.3 m
• Optical face
  PMMA
• Mass
  approx. 55 g
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Degree of protection
  IP67 / IP69 / IP69K
• Housing
  PC (Polycarbonate)
• Housing depth
  41.7 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing height
  61.7 mm
• Product standard
  EN 60947-5-2
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Housing width
  15 mm
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Laser safety
  EN 60825-1:2014
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Response time
  2.3 ms
• Communication interface
  IEC 61131-9
• Switching frequency
  217 Hz
• Voltage drop
  ≤ 1.5 V DC
Usage category
DC-12 and DC-13
Switching current
max. 100 mA , resistive load
Switching voltage
max. 30 V DC
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link, Q2 - Pin2: NPN normally-open, PNP normally-closed
Compatible master port type
A
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
SIO mode support
yes
Process data width
Process data input 2 Bit, Process data output 2 Bit
Transfer rate
COM2 (38.4 kBit/s)
IO-Link revision
1.1
Device profile
Identification and diagnosis, Smart Sensor type 0
Device ID
0x111812 (1120274)
Protection class
III
Min. cycle time
2.3 ms
Interface type
IO-Link ( via C/Q = pin 4 )
No-load supply current
< 16 mA at 24 V supply voltage
Ripple
max. 10 %
Operating voltage
10 ... 30 V DC
Control elements
Teach-In key
Mission Time (TM)
20 a
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Opening angle
approx. 0.3 °
Ambient light limit
EN 60947-5-2 : 45000 Lux
MTTFd
560 a
Diagnostic Coverage (DC)
0 %
Black-white difference (6 %/90 %)
< 2 %, ,
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
Repetition rate
approx. 2.4 kHz
Pulse length
5.5 µs
max. pulse energy
< 40 nJ
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Wave length
680 nm
Detection range
60 ... 350 mm
Light type
modulated visible red light
Detection range max.
40 ... 400 mm
Detection range min.
60 ... 100 mm
Adjustment range
100 ... 350 mm
Light source
laser diode
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Laser class
1
Reference target
standard white, 100 mm x 100 mm

Related documents OQT350-R201-2EP-IO-0,3M-V1-L Specs