OQT350-R200-EP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Mass
  approx. 41 g
• Optical face
  PMMA
• Connection
  300 mm fixed cable with M8 x 1, 3-pin connector
• Cable length
  0.3 m
• Housing depth
  41.7 mm
• Degree of protection
  IP67 / IP69 / IP69K
• Housing
  PC (Polycarbonate)
• Housing width
  15 mm
• Housing height
  50.6 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• FDA approval
  IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• EAC conformity
  TR CU 020/2011
• Laser safety
  EN 60825-1:2014
• Response time
  2.3 ms
• Product standard
  EN 60947-5-2
• Communication interface
  IEC 61131-9
• Switching frequency
  217 Hz
Voltage drop
≤ 1.5 V DC
Usage category
DC-12 and DC-13
Switching voltage
max. 30 V DC
Switching current
max. 100 mA , resistive load
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Compatible master port type
A
Switching type
The default setting is: C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link,
SIO mode support
yes
Min. cycle time
2.3 ms
Process data width
Process data input 2 Bit, Process data output 2 Bit
Transfer rate
COM2 (38.4 kBit/s)
Device ID
0x111802 (1120258)
Device profile
Identification and diagnosis, Smart Sensor type 0
IO-Link revision
1.1
Ripple
max. 10 %
Protection class
III
Interface type
IO-Link ( via C/Q = pin 4 )
No-load supply current
< 16 mA at 24 V supply voltage
Control elements
Teach-In key
Function indicator
LED yellow: constantly on - switch output active, constantly off - switch output inactive
Operating voltage
10 ... 30 V DC
Diagnostic Coverage (DC)
0 %
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Mission Time (TM)
20 a
Opening angle
approx. 0.3 °
Diameter of the light spot
approx. 3 mm at a distance of 350 mm
MTTFd
560 a
max. pulse energy
< 40 nJ
Black-white difference (6 %/90 %)
< 2 %, ,
Pulse length
5.5 µs
Repetition rate
approx. 2.4 kHz
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Ambient light limit
EN 60947-5-2 : 45000 Lux
Wave length
680 nm
Light source
laser diode
Detection range min.
60 ... 100 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Adjustment range
100 ... 350 mm
Detection range max.
40 ... 400 mm
Laser class
1
Light type
modulated visible red light
Detection range
60 ... 350 mm
Reference target
standard white, 100 mm x 100 mm

Related documents OQT350-R200-EP-IO-0,3M-V3-L Specs