8083815 Festo Electric Actuators

8083815 Product Details

• KC characters
  KC EMC
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Logic input specification
  Based on IEC 61131-2, type 1
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection type
  Plug
• Number of digital logic inputs
  2
• Relative air humidity
  0 - 90 %
• Characteristics of logic input
  Configurable Not galvanically isolated
• Permissible voltage fluctuations
  +/- 15 %
• Additional functions
  User interface Integrated end-position sensing
• Insulation protection class
  B
• Display
  LED
• Switching logic at outputs
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Rotor position sensor
  Absolute encoder, single-turn
• Ready status indication
  LED
• Rotor position sensor measuring principle
  Magnetic
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• DC nominal voltage
  24 V
• Max. current consumption
  3000 mA
Work range of logic input
24 V
IO-Link®, port class
A
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
Symbol
00997294
Max. speed
0.25 m/s
Fixed bearing dynamic basic load rating
7413 N
Max. force Fz
1314 N
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Parameterization interface
IO-Link® User interface
Logic interface, connection pattern
00992264
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Input switching logic
PNP (positive switching)
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, data memory required
500 byte
Reversing backlash
150 µm
Position sensing
Motor encoder For proximity sensor
Duty cycle
100%
Corrosion resistance class (CRC)
0 - No corrosion stress
Linear guide dynamic basic load rating
3240 N
Power supply, type of connection
Plug
Logic interface, number of poles/wires
8
Storage temperature
-20 °C ... 60 °C
Rotor position sensor resolution
16 bit
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, protocol version
Device V 1.1
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Power supply, number of pins/wires
4
Nominal current
3 A
IO-Link®, number of ports
1
IO-Link®, minimum cycle time
1 ms
Working stroke
50 mm
Spindle pitch
10 mm/U
Homing
Fixed stop block positive Reference switch
Spindle type
Ball screw drive
Degree of protection
IP40
Certification
RCM compliance mark
Max. torque Mz
7.05 Nm
Max. feed force Fx
120 N
Feed constant
10 mm/U
Additional weight per 10 mm stroke
63 g
Max. cable length
15 m outputs 20 m for IO-Link® operation
IO-Link®, Connection technology
Plug
IO-Link®, process data width IN
2 Byte
Protection class
III
IO-Link®, SIO mode support
Yes
Screw diameter
10 mm
Type code
EGSS
Motor type
Stepper motor
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Dynamic basic load rating, ball screw drive
3200 N
Max. torque Mx
8.14 Nm
Guide value for payload, vertical
6 kg
Statistical fixed bearing load rating
3966 N
Product weight
1552 g
Slide carriage material
Roller bearing steel
Spindle material
Roller bearing steel
IO-Link®, process data width OUT
2 Byte
Size
45
Mounting position
Any
Design
Electrical mini-slide With integrated drive
Repetition accuracy
±0.015 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fy
1314 N
Max. torque My
7.05 Nm
Guide value for payload, horizontal
6 kg
Ball screw drive statistical basic load rating
5900 N
Maintenance interval
Life-time lubrication
Additional moving mass per 10 mm stroke
30 g
Guide rail material
Roller bearing steel
Spindle nut material
Roller bearing steel
Max. radial force on actuator shaft
340 N
Linear guide statistical basic load rating
5630 N
Reference value, running performance
5000 km
Basic weight with 0 mm stroke
1238 g
Housing material
Wrought aluminum alloy, anodized
Slide material
Wrought aluminum alloy, anodized
Moving mass at 0 mm stroke
212 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
Type of mounting
With internal thread With cylindrical pin
Material of yoke plate
Wrought aluminum alloy, anodized

Product condition

Related documents 8083815 Specs