8083573 Festo Electric Actuators

8083573 Product Details

• Drive pinion effective diameter
  24.83 mm
• Relative air humidity
  0 - 90 %
• Rotor position sensor measuring principle
  Magnetic
• Switching logic at outputs
  PNP (positive switching)
• Ready status indication
  LED
• Guide value for payload, horizontal
  4 kg
• DC nominal voltage
  24 V
• Max. current consumption
  5300 mA
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• IO-Link®, process data width OUT
  2 Byte
• KC characters
  KC EMC
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Permissible voltage fluctuations
  +/- 15 %
• Input switching logic
  PNP (positive switching)
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, number of poles/wires
  8
• Storage temperature
  -20 °C ... 60 °C
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, number of ports
1
Working stroke
600 mm
Toothed belt pitch
3 mm
Symbol
00997293
Parameterization interface
IO-Link® User interface
Rotor position sensor
Absolute encoder, single-turn
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Display
LED
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Logic interface, connection pattern
00992264
Number of digital logic inputs
2
Stroke reserve
0 mm
Mounting position
Horizontal
Guide
Recirculating ball bearing guide
Max. acceleration
6 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
1800 N
Moving mass
482 g
Profile material
Wrought aluminum alloy, anodized
Belt pulley material
High-alloy stainless steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Size
60
Design
Electromechanical linear axis With integrated drive
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. speed
1.3 m/s
2nd moment of area Iy
441000 mm⁴
Max. force Fy
600 N
Max. feed force Fx
65 N
Product weight
5535 g
Cover strip material
Stainless steel strip
Toothed belt material
Polychloroprene with glass fiber
Logic input specification
Based on IEC 61131-2, type 1
Insulation protection class
B
Homing
Fixed stop block positive Fixed stop block, negative
Position sensing
Motor encoder For proximity sensor
Logic interface, connection type
Plug
Power supply, connection pattern
00995989
Power supply, type of connection
Plug
Power supply, number of pins/wires
4
Max. current of digital logic outputs
100 mA
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
IO-Link®, Connection technology
Plug
Type code
ELGS
Motor type
Stepper motor
Repetition accuracy
±0.1 mm
Degree of protection
IP40
2nd moment of area Iz
542000 mm⁴
Max. torque Mz
31.8 Nm
Moving mass at 0 mm stroke
482 g
Slide weight
139 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Die-cast aluminum
IO-Link®, data memory required
500 byte
Toothed belt elongation
0.124 %
Additional functions
User interface Integrated end-position sensing
Duty cycle
100%
Certification
RCM compliance mark
Max. torque My
31.8 Nm
Feed constant
78 mm/U
Drive cover material
Die cast aluminum, painted
Guide rail material
Tempered steel
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
29.1 Nm
Torsion moment of inertia It
29800 mm⁴
Material of end caps
Die cast aluminum, painted
Slide carriage material
Tempered steel

Product condition

Related documents 8083573 Specs