8083579 Festo Electric Actuators

Product Details

• Power supply, connection pattern
  00995989
• Max. current of digital logic outputs
  100 mA
• Guide value for payload, horizontal
  4 kg
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Parameterization interface
  IO-Link® User interface
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Switching logic at outputs
  PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Drive pinion effective diameter
  24.83 mm
• Insulation protection class
  B
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection type
  Plug
• Logic interface, connection pattern
  00992264
• Number of digital logic outputs 24 V DC
  2
• Logic interface, number of poles/wires
  8
• Max. current consumption
  5300 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, protocol version
  Device V 1.1
IO-Link®, data memory required
500 byte
KC characters
KC EMC
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Position sensing
Motor encoder For proximity sensor
Ready status indication
LED
Characteristics of digital logic outputs
Configurable Not galvanically isolated
DC nominal voltage
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
Working stroke
2000 mm
Type code
ELGS
Motor type
Stepper motor
Material of end caps
Die cast aluminum, painted
Belt pulley material
High-alloy stainless steel
Logic input specification
Based on IEC 61131-2, type 1
Relative air humidity
0 - 90 %
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
IO-Link®, Connection technology
Plug
Toothed belt elongation
0.124 %
Power supply, type of connection
Plug
Power supply, number of pins/wires
4
Storage temperature
-20 °C ... 60 °C
IO-Link®, process data width IN
2 Byte
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
Stroke reserve
0 mm
Mounting position
Horizontal
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Max. acceleration
6 m/s²
Duty cycle
100%
Certification
RCM compliance mark
2nd moment of area Iy
441000 mm⁴
Max. torque My
31.8 Nm
Max. torque Mz
31.8 Nm
Moving mass at 0 mm stroke
482 g
Nominal current
5.3 A
IO-Link®, minimum cycle time
1 ms
IO-Link®, port class
A
IO-Link®, number of ports
1
Toothed belt pitch
3 mm
Symbol
00997293
Repetition accuracy
±0.1 mm
Degree of protection
IP40
Max. force Fy
600 N
Max. feed force Fx
65 N
Moving mass
482 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Guide rail material
Tempered steel
Size
60
Design
Electromechanical linear axis With integrated drive
Max. speed
1.3 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. force Fz
1800 N
Max. torque Mx
29.1 Nm
Feed constant
78 mm/U
Product weight
11555 g
Profile material
Wrought aluminum alloy, anodized
Drive cover material
Die cast aluminum, painted
Guide
Recirculating ball bearing guide
Additional functions
User interface Integrated end-position sensing
Ambient temperature
0 °C ... 50 °C
2nd moment of area Iz
542000 mm⁴
Torsion moment of inertia It
29800 mm⁴
Slide weight
139 g
Cover strip material
Stainless steel strip
Slide material
Die-cast aluminum
Slide carriage material
Tempered steel
Toothed belt material
Polychloroprene with glass fiber

Related documents 8083579 Specs