8083387 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Parameterization interface
  IO-Link® User interface
• Permissible voltage fluctuations
  +/- 15 %
• Input switching logic
  PNP (positive switching)
• Rotor position sensor measuring principle
  Magnetic
• Power supply, connection pattern
  00995989
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Guide value for payload, vertical
  13 kg
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Display
  LED
• Switching logic at outputs
  PNP (positive switching)
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic inputs
  2
• Max. current of digital logic outputs
  100 mA
• Work range of logic input
  24 V
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, Connection technology
  Plug
• Mounting position
  Any
• Motor type
  Stepper motor
Symbol
00997292
Duty cycle
100%
Certification
RCM compliance mark
Max. force Fz
1800 N
Logic input specification
Based on IEC 61131-2, type 1
Relative air humidity
0 - 90 %
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Ready status indication
LED
Logic interface, connection type
Plug
Power supply, number of pins/wires
4
Guide value for payload, horizontal
20 kg
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
Protection class
III
IO-Link®, data memory required
500 byte
Guide
Recirculating ball bearing guide
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Degree of protection
IP40
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Torsion moment of inertia It
29800 mm⁴
Cover strip material
High-alloy stainless steel
Slide material
Die-cast aluminum
Spindle nut material
Steel
Insulation protection class
B
Homing
Fixed stop block positive Fixed stop block, negative
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, type of connection
Plug
DC nominal voltage
24 V
IO-Link®, minimum cycle time
1 ms
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Stroke reserve
0 mm
Type code
ELGS
Spindle type
Ball screw drive
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Max. torque My
31.8 Nm
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Static deflection (load at standstill)
0.1 % of axis length
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Rotor position sensor
Absolute encoder, single-turn
Position sensing
Motor encoder For proximity sensor
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Logic interface, number of poles/wires
8
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, number of ports
1
Size
60
Design
Electromechanical linear axis With integrated drive
Max. speed
0.25 m/s
2nd moment of area Iy
441000 mm⁴
Max. force Fy
600 N
Max. torque Mz
31.8 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Material of end caps
Die cast aluminum, painted
Slide carriage material
Steel
Number of digital logic outputs 24 V DC
2
Nominal current
5.3 A
Max. current consumption
5300 mA
IO-Link®, process data width IN
2 Byte
IO-Link®, communication mode
COM3 (230.4 kBd)
Working stroke
500 mm
Screw diameter
12 mm
Spindle pitch
12 mm/U
Additional functions
User interface Integrated end-position sensing
Repetition accuracy
±0.01 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iz
542000 mm⁴
Max. torque Mx
29.1 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Max. feed force Fx
200 N
Product weight
5412 g
Drive cover material
Die cast aluminum, painted
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Feed constant
12 mm/U
Moving mass
525 g
Profile material
Wrought aluminum alloy, anodized
Guide rail material
Steel

Related documents 8083387 Specs