8083574 Festo Electric Actuators
Part#:8083574
Manufacturer:Festo
Alt. Part#:ELGS-TB-KF-60-800-ST-M-H1-PLK-AA
Product Lifecycle:Active
Get a quick Quote!
toothed belt axis unit ELGS-TB-KF-60-800-ST-M-H1-PLK-AA Effective diameter of drive pinion: 24,83 mm, Working stroke: 800 mm, Size: 60, Stroke reserve: 0 mm, Toothed-belt stretch: 0,124 %
About the manufacturer: Festo is one of the manufacturers that offers Electric Actuators that you can order at marketplace.quotebeam.com. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 8083574 Festo price in the box on the right side or send a quick quote.
Product Details
- Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
- Max. cable length 15 m outputs 20 m for IO-Link® operation
- Input switching logic PNP (positive switching)
- Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
- Characteristics of logic input Configurable Not galvanically isolated
- Number of digital logic outputs 24 V DC 2
- Storage temperature -20 °C ... 60 °C
- Max. current consumption 5300 mA
- IO-Link®, process data content OUT 1 bit (move in) 1 bit (quit error)
- IO-Link®, protocol version Device V 1.1
- IO-Link®, data memory required 500 byte
- Mounting position Horizontal
- Max. speed 1.3 m/s
- Ambient temperature 0 °C ... 50 °C
- Feed constant 78 mm/U
- Moving mass 482 g
- Drive cover material Die cast aluminum, painted
- Max. force Fz 1800 N
- Logic input specification Based on IEC 61131-2, type 1
- Rotor position sensor Absolute encoder, single-turn
- Display LED
- Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
- Power supply, number of pins/wires 4
- Logic interface, number of poles/wires 8
- Rotor position sensor resolution 16 bit
- IO-Link®, minimum cycle time 1 ms
- Protection class III
- Stroke reserve 0 mm
- Design Electromechanical linear axis With integrated drive
- Additional functions User interface Integrated end-position sensing
- Certification RCM compliance mark
- Max. torque My 31.8 Nm
- Moving mass at 0 mm stroke 482 g
- Profile material Wrought aluminum alloy, anodized
- Slide carriage material Tempered steel
- KC characters KC EMC
- Insulation protection class B
- Relative air humidity 0 - 90 %
- Rotor position sensor measuring principle Magnetic
- Switching logic at outputs PNP (positive switching)
- Logic interface, connection type Plug
- Logic interface, connection pattern 00992264
- Number of digital logic inputs 2
- Guide value for payload, horizontal 4 kg
- Nominal current 5.3 A
- IO-Link®, process data content IN 1 bit (state device) 1 bit (state out)
- IO-Link®, Connection technology Plug
- Size 60
- Guide Recirculating ball bearing guide
- Symbol 00997293
- Duty cycle 100%
- 2nd moment of area Iz 542000 mm⁴
- Torsion moment of inertia It 29800 mm⁴
- Slide weight 139 g
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Toothed belt material Polychloroprene with glass fiber
- Drive pinion effective diameter 24.83 mm
- Permissible voltage fluctuations +/- 15 %
- Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
- Ready status indication LED
- Power supply, connection pattern 00995989
- Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
- Max. current of digital logic outputs 100 mA
- Work range of logic input 24 V
- IO-Link®, SIO mode support Yes
- IO-Link®, communication mode COM3 (230.4 kBd)
- IO-Link®, port class A
- IO-Link®, number of ports 1
- Toothed belt elongation 0.124 %
- Toothed belt pitch 3 mm
- Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
- CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive
- Max. force Fy 600 N
- Max. feed force Fx 65 N
- Material of end caps Die cast aluminum, painted
- Guide rail material Tempered steel
- Parameterization interface IO-Link® User interface
- Homing Fixed stop block positive Fixed stop block, negative
- Position sensing Motor encoder For proximity sensor
- Characteristics of digital logic outputs Configurable Not galvanically isolated
- Power supply, type of connection Plug
- DC nominal voltage 24 V
- IO-Link®, process data width IN 2 Byte
- IO-Link®, service data contents IN 32 bit force 32 bit speed
- IO-Link®, process data width OUT 2 Byte
- Working stroke 800 mm
- Type code ELGS
- Motor type Stepper motor
- Max. acceleration 6 m/s²
- Repetition accuracy ±0.1 mm
- Degree of protection IP40
- 2nd moment of area Iy 441000 mm⁴
- Max. torque Mx 29.1 Nm
- Max. torque Mz 31.8 Nm
- Product weight 6395 g
- Cover strip material Stainless steel strip
- Belt pulley material High-alloy stainless steel
- Slide material Die-cast aluminum
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents 8083574 Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Festo
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Festo Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Festo Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Festo, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
