Inductive Sensors

BI20U-CA40-AP6X2-B1141 W/BS2.1

Inductive Sensor, Rated switching distance 20 mm, Flush, Rectangular, height 40 mm, Variable orientation of active face in 5 directions, Sensor housing GD-ALSI 12, Active face PA6-GF30, Factor 1 for all metals, Resistant to magnetic fields, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, 7/8 male connector, "

Turck

BI15U-Q20-VP6X2-0.2-RS4.4T

Inductive Sensor, Rated switching distance 15 mm, Cable length (L) 0.2 m, Flush, Rectangular, height 20 mm, Active face on top, Plastic, PBT-GF30-V0, Factor 1 for all metals, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 4-wire, 10…30 VDC, Changeover contact, PNP output, Cable with male end M12 x 1

Turck

NI20U-EM30-AP6X2-H1141/S1589

Inductive Sensor, With WeldGuard™ Coating, Rated switching distance 20 mm, Non-flush, M30 × 1.5 threaded tube, Stainless steel, 1.4301, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, Auto-compensation protects against pre-damping, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

BI4-M12T-AP6X 7M

Inductive Sensor, With Increased Switching Distance, Rated switching distance 4 mm, Cable length (L) 7 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI1.5-EG08K-Y1-0.2-PSG3M

Inductive Sensor, Rated switching distance 1.5 mm, Cable length (L) 0.2 m, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Pigtail with male end M8 x 1, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

NI20-CK40-AD4X-H1141 W/BS2.1

Inductive Sensor, Rated switching distance 20 mm, Non-flush, Rectangular, height 40 mm, Variable orientation of active face in 5 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, DC 2-wire, 10…65 VDC, NO contact, M12 x 1 male connector

Turck

BI1.5-EG08K-AN6X-0.3-RS4T

Inductive Sensor, Rated switching distance 1.5 mm, Cable length (L) 0.3 m, Flush, Threaded barrel, M8 × 1, Stainless steel, 1.4305 (AISI 303), DC 3-wire, 10…30 VDC, NO contact, NPN output, Pigtail with M12 × 1 connector

Turck

BI2-G12-AN6X 60MM

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

BI2-EG08K-AN6X-H1341/S1589

Inductive Sensor, With Weldguard® coating, Rated switching distance 2 mm, Flush, M8 × 1 threaded barrel, Stainless steel, 1.4305 (AISI 303), Large sensing range, DC 3-wire, 10…30 VDC, NO contact, NPN output, M12 x 1 male connector

Turck

BI2-EG08-RN6X-0.2-RS4T

Inductive Sensor, With Increased Switching Distance, Rated switching distance 2 mm, Cable length (L) 0.2 m, Flush, Threaded barrel, M8 × 1, Stainless steel, 1.4305 (AISI 303), Large sensing range, DC 3-wire, 10…30 VDC, NC contact, NPN output, Pigtail with M12 × 1 connector

Turck

BI1-EG05-AP6X 7M

Inductive Sensor, Rated switching distance 1 mm, Cable length (L) 7 m, Flush, Threaded barrel, M5 × 0.5, Stainless steel, 1.4305 (AIS303), , DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI2-G12-AP6X-0.2-RS4T

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 0.2 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, PNP output, Pigtail with male end M12 x 1

Turck

BI4-MT12HE-AP6X-H1141

Inductive Sensor, With Increased Switching Distance, Rated switching distance 4 mm, Flush, Threaded barrel, M12 x 1, Brass, PTFE-coated, Duroplast front cap, very resistant to thermal and mechanical load, Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

NI4-G12-RDZ32X-B3131

Inductive Sensor, Rated switching distance 4 mm, Non-flush, Threaded barrel, M12 x 1, Chrome-plated brass, AC 2-wire, 20…250 V AC, DC 2-wire, 10…300 V DC, NC contact, 1/2 connector, "

Turck

BI15-CP40-AD4X-H1141

Inductive Sensor, Rated switching distance 15 mm, Flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT-GF30-VO, High-luminance corner LEDs, Optimum view of operating voltage and switching state from any position, DC 2-wire, 10…65 VDC, NO contact, M12 x 1 male connector

Turck

BI20-G47-AP4X-0.2-RSCV4T

Inductive Sensor, Rated switching distance 20 mm, Cable length (L) 2 m, Flush, Threaded barrel, PG36, Chrome-plated brass

Turck

NI2-Q6.5-0.1-BDS-2AP6X3-H1141/S34

Inductive Sensor, Monitoring Kit for Power Clamps, Rated switching distance 2 mm, Cable length (L) 0.1 m, Non-flush, BDS power block with two connected sensors and LEDs, Robust rotatable connector 0°, 45° and 90°, for optimal cable routing, Plastic, Trogamid, Resistant to magnetic fields (weld-resistant), for DC and AC fields up to 100 mT, 2 x NO contact, PNP output, DC 4-wire, 10…30 VDC

Turck

BI5-G18-AP6X 60MM

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck

BI2-G12-AN6X 60MM 7M

Inductive Sensor, Rated switching distance 2 mm, Cable length (L) 7 m, Flush, Threaded barrel, M12 x 1, Chrome-plated brass, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

BI5U-Q08-AP6X2-0.2-PSG3M

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 0.2 m, Flush, Rectangular, height 8 mm, Active face on top, Metal, Zamak, nickel-plated, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, Pigtail with male end M8 x 1

Turck