Inductive Sensors

NI6-EG08FE-AN6X-H1341

Inductive Sensor, Stainless Steel Front, Rated switching distance 6 mm, Non-flush, Threaded barrel, M8 x 1, Stainless steel, 1.4305, DC 3-wire, 10…30 VDC, NO contact, NPN output, M12 x 1 male connector

Turck

NI40U-CP40-VN4X2/S10

Inductive Sensor, With Extended Switching Distance, Rated switching distance 40 mm, Non-flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, Factor 1 for all metals, Increased switching distance, Protection class IP68, Large coverage, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 4-wire, 10…65 VDC, Chang

Turck

BI2-CRS1159-ADZ30X2-B1131/S34

Inductive Sensor, for high pressures, Rated switching distance 2 mm, Flush, Smooth barrel, stainless steel, 1.4305, Ø 12.7 mm, Housing, GD-Zn, chromated, , Admissible pressure static/dynamic 200/100 bar, Magnetic-resistant (insensitive to magnetic DC and AC fields), AC 2-wire, 20…250 VAC, DC 2-wire, 10…300 VDC, NO contact, 7/8" male connector

Turck

BI10-EM30-Y1X-H1141

Inductive Sensor, Rated switching distance 10 mm, Flush, M30 × 1.5 threaded tube, Stainless steel, 1.4301, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), M12 x 1 male connector, ATEX category II 1 G, Ex zone 0, ATEX category II 1 D, Ex zone 20, SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0, SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1 with redundant configuration HFT1

Turck

NI5-G12-Y0 7M

Inductive Sensor, Rated switching distance 5 mm, Cable length (L) 7 m, Non-flush, M12 × 1 threaded barrel, Chrome-plated brass, DC 2-wire, nom. 8.2 VDC, Output acc. to DIN EN 60947-5-6 (NAMUR), Cable connection

Turck

BI2-EG08-AP6X-H1341/S1589

Inductive Sensor, With Weldguard® coating, Rated switching distance 2 mm, Flush, M8 × 1 threaded barrel, Stainless steel, 1.4305 (AISI 303), Large sensing range, DC 3-wire, 10…30 VDC, NO contact, PNP output, M12 x 1 male connector

Turck

NI25U-CP40-AP6X2/S10

Inductive Sensor, Rated switching distance 25 mm, Non-flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, Thread, 1/2-14 NPT, Factor 1 for all metals, Protection class IP67, Resistant to magnetic fields, Extended temperature range, High switching frequency, DC 3-wire, 10…30 VDC, NO contact, PNP output, Terminal chamber

Turck

BI2-EG08-RN6X-V1131

Inductive Sensor, With Increased Switching Distance, Rated switching distance 2 mm, Flush, M8 × 1 threaded barrel, Stainless steel, 1.4305 (AISI 303), Large sensing range, DC 3-wire, 10…30 VDC, NC contact, NPN output, M8 x 1 male connector

Turck

BI4U-MT12-AN6X

Inductive Sensor, With Extended Switching Distance, Rated switching distance 4 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Brass, PTFE-coated, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, Recessed mountable, DC 3-wire, 10…30 VDC, NO contact, NPN output, Cable connection

Turck

BI10U-MT18-AN6X-H1141

Inductive Sensor, Rated switching distance 10 mm, Flush, Threaded barrel, M18 x 1, Brass, PTFE-coated, Factor 1 for all metals, Protection class IP68, Resistant to magnetic fields, Large switching distance, DC 3-wire, 10…30 VDC, NO contact, NPN output, M12 x 1 male connector

Turck

BI7-Q08-VN6X2

Inductive Sensor, With Increased Switching Distance, Rated switching distance 7 mm, Cable length (L) 2 m, Flush, Rectangular, height 8 mm, Active face on top, Metal, Zamak, nickel-plated, Large sensing range, DC 4-wire, 10…30 VDC, Complementary, NPN output, Cable connection

Turck

BI8-EM18-AP45XLD

Inductive Sensor, For Use in Vehicle Board Nets, Rated switching distance 8 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Stainless steel, 1.4301, For vehicle board nets, 12 V and 24 V, Increased interference immunity 100 V/m radiated acc. ISO 11452-4 and 100 mA BCI acc. to ISO 11452-2, Load-dump protection acc. to DIN ISO 7637-2 (SAE J 113-11), Extended temperature range, High protection class IP68/IP69K, Protection against salt spray and rapid temperature change, Laser engraved la

Turck

BI2-S12-AZ31X/S100

Inductive Sensor, With Increased Temperature Range, Rated switching distance 2 mm, Cable length (L) 2 m, Flush, Threaded barrel, M12 x 1, Plastic, PA12‐GF30, Temperatures up to +100 °C, AC 2-wire, 20…250 VDC, DC 2-wire, 10…300 VDC, NO contact, Cable connection

Turck

BI8U-Q08-AP6X2-0.2-RS4T

Inductive Sensor, With Extended Switching Distance, Rated switching distance 8 mm, Cable length (L) 0.2 m, Flush, Rectangular, height 8 mm, Active face on top, Metal, Zamak, nickel-plated, Factor 1 for all metals, Increased switching distance, Protection class IP68, Resistant to magnetic fields, Mountable on metal, DC 3-wire, 10…30 VDC, NO contact, PNP output, Pigtail with male end M12 x 1

Turck

BI5-M18-RZ3X/S120

Inductive Sensor, With Increased Temperature Range, Rated switching distance 5 mm, Cable length (L) 2 m, Flush, Threaded barrel, M18 x 1, Chrome-plated brass, S120 = Temperatures up to +120 °C, AC 2-wire, 20…250 VAC, NC contact, Cable connection

Turck

BI15-CP40-FZ3X2/S100-S10

Inductive Sensor, With Increased Temperature Range, Rated switching distance 15 mm, Flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, Temperatures up to +100 °C, AC 2-wire, 20…250 VAC, DC 2-wire, 10…300 VDC, NC/NO programmable, Terminal chamber

Turck

NI20U-TS12-AP6X2-V1531

Inductive Sensor, Detection of Small and Fast Tube-guided Parts, Rated switching distance 20 mm, Non-flush, Rectangular, height 12 mm, Plastic, PBT‐GF30‐V0, Resistant to magnetic fields, Factor 1 for all metals, High sensitivity for detection of small parts, Output pulse length min. 100 ms, DC 3-wire, 10…30 VDC, NO contact, PNP output, M8 × 1 male connector, Angle connector with cable connection on the right

Turck

BI2-EG08-AG41X-H1341

Inductive Sensor, With Increased Switching Distance, Rated switching distance 2 mm, Flush, Threaded barrel, M8 x 1, Stainless steel, 1.4427 SO, Large sensing range, DC 2-wire, 10…55 VDC, Polarized version, NO contact, M12 x 1 male connector

Turck

NI40-CP40-FZ3X2/S100-S10

Inductive Sensor, With Increased Temperature Range, Rated switching distance 40 mm, Non-flush, Rectangular, height 40 mm, Variable orientation of active face in 9 directions, Plastic, PBT‐GF30‐V0, High luminance corner LEDs, Optimum view on supply voltage and switching state from any position, Temperatures up to +100 °C, AC 2-wire, 20…250 VAC, DC 2-wire, 10…300 VDC, NC/NO programmable, Terminal chamber

Turck

NI15-EM30-AP6/S907 7M

Inductive Sensor, With Increased Temperature Range, Rated switching distance 15 mm, Cable length (L) 7 m, Non-flush, Threaded barrel, M30 x 1.5, Stainless steel, 1.4571, Temperatures up to +160 °C, DC 3-wire, 10…30 VDC, NO contact, PNP output, Cable connection

Turck