PS010V-304-LI2UPN8X-H1141 Turck Pressure Sensors

Turck PS010V-304-LI2UPN8X-H1141 is a sensor designed for pressure measurement and switching, belonging to the PS500 series. It features a programmable compound pressure sensor/switch with a set point range of 1-100% and a reset point range of 0.5-99.5%. The unit measures pressure in bar, psi, kPa, MPa, and miscellaneous units, and operates within an ambient air temperature range of -40°C to +80°C. The sensor has a rotatable housing with a diameter of 34mm and is equipped with a 4-pin M12 Eurofast QD male connector and a G1/4" (1/4" BSPP) threaded female process port for connection. It offers an IP67 degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The cylindrical body sensor has a maximum switching frequency of 180Hz and is constructed from 1.4305 (303) stainless steel for both the housing and wetted parts, with a ceramics Al2O3 pressure transducer and a stainless steel pressure connection. It can measure pressure ranges from -1 to +10bar (-14.5 to +145psi) and supports the IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, and it can operate in either NO (Normally Open) or NC (Normally Closed) modes, which are programmable. It features two digital outputs (15-30Vdc; NPN/PNP), with protection functions against short-circuit (pulsed) and reverse polarity. The response time ranges from 50 to 600ms, with a set point accuracy of +/-0.5% FS and an analog accuracy of ≤+/-0.5% FS. The sensor's repeatability is ≤0.5% of the measuring range, and it experiences a zero shift/span shift of ≤0.15% of the measuring range per °C. Its current consumption is 50mA, and it includes time delay settings for both ON-delay and OFF-delay ranging from 0-50.