PS010V-303-LI2UPN8X-H1141/S1593 Turck Pressure Sensors

Turck PS010V-303-LI2UPN8X-H1141/S1593 is a sensor designed for pressure measurement with instrumentation programmable capabilities, including a compound pressure sensor. It offers a set point range of 1-100% and a reset point range of 0.5-99.5%, with measurement units available in bar, psi, kPa, MPa, and miscellaneous options. The sensor operates within an ambient air temperature range of -40°C to +80°C and features a 1.5" tri-clamp sanitary diaphragm seal. It has a 34mm diameter and is pre-equipped with a 4-pin M12 Eurofast QD male connector and a 1/4" NPT threaded male process port. As part of the PS300 series, it boasts an IP69K degree of protection and requires a supply voltage of 18-30Vdc (24Vdc nominal). The sensor's cylindrical body is made from 1.4305 (303) stainless steel housing, wetted parts, and pressure connection, with a ceramics Al2O3 pressure transducer. It can measure pressure ranges from -1 to +10bar (-14.5 to +145psi) and supports IO-Link communication protocol. The fluid medium temperature range is -40°C to +85°C, with operating modes of NO (Normally Open) or NC (Normally Closed) programmable. It includes protection functions against short-circuit (pulsed) and reverse polarity, with a response time of 50 - 600ms. The sensor features 1 x analog output (4-20mA; can also be used as a NPN/PNP digital output), set point accuracy of +/-0.5% FS, analog accuracy of ≤+/-0.5% FS, a response time of <3ms, repeatability of ≤0.5% of the measuring range, and zero shift/span shift of ≤0.15% of the measuring range per °C. Its current consumption is 50mA, with time delays for ON-delay and OFF-delay settings ranging from 0-50.