LTMR27MBD

Schneider Electric LTMR27MBD, part of the LTMR (TeSys T) sub-range, is a motor management controller that offers a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports multiple operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The device features comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault, alarm, diagnostic fault, and motor control function counters. It also provides fault history and diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, as well as motor control commands. The LTMR27MBD records motor statistics like the number of control commands, operating time, starts per hour, last start I max, and duration of last start. Thermal overload and system operating statistics are meticulously tracked, including time to trip and restart. It utilizes 3 measurement current transformers with a screw-clamp connection type and communicates via Modbus protocol. Designed with 3 poles, its protection functions include thermal overload, motor temperature monitoring with up to 3 sensors, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault detection, and frequent starting inhibition to prevent motor overheating. The rated current ranges from 1.35 to 27 A with various protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. It operates on a 24 V DC supply voltage, supports a phase-to-phase rated voltage of up to 690 V at 50-60Hz, and offers a broad measurement function for current, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR27CFM

Verified stock: 0

Schneider Electric LTMR27CFM, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and Custom mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and more. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, and duration of last start. Thermal overload statistics offer insights into time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with screw-clamp terminals, utilizing the CANopen communication protocol. It is a 3 Pole device with protection functions against thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is AC 100-240 V, with a rated voltage for phase-to-phase at 50-60Hz 690 V. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR100DBD

Verified stock: 0

Schneider Electric LTMR100DBD, part of the LTMR (TeSys T) sub-range, is designed for motor management with a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and "Custom" mode. The device offers comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside detailed fault statistics including protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, while thermal overload statistics cover time to trip and time to restart. System operating statistics include run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with a screw-clamp control circuit. It uses the DeviceNet communication protocol and is a 3 Pole device. Protection functions include thermal overload, motor temperature monitoring with up to 3 sensors in series, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and protection against frequent starting. Rated current ranges from 5-100 A with protection settings adjustable for various conditions. Supply voltage is DC 24 V, and the rated voltage for AC phase-to-phase is 690 V at 50-60Hz. Measurement functions cover a wide range of current and temperature monitoring capabilities, ensuring comprehensive protection and management of motor operations.

Schneider Electric

LTMR27EBD

Verified stock: 0

Schneider Electric LTMR27EBD, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and a customizable mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and a detailed fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, with thermal overload statistics offering time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is through 3 measurement current transformers with screw-clamp terminals, utilizing an Ethernet TCP/IP Modbus TCP communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variations, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is DC 24 V, with a rated voltage for AC phase-to-phase at 690 V (50-60Hz). Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, catering to a broad spectrum of monitoring and protection needs.

Schneider Electric

This item can ship within 5 days!

LADT23

$63.07

Verified stock: 2

Schneider Electric LADT23 is an auxiliary contact designed for time-delayed operations, belonging to the Deca sub-range. It features a time-delayed auxiliary contact block or switch block functionality with spring connections for secure attachment. This 2-pole device offers front clip-on mounting for easy installation. It is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, providing a time delay range of 0.1-30 seconds for ON-delay operations.

Schneider Electric

This item can ship within 5 days!

LC1D50AP7

$160.43

Verified stock: 2

Schneider Electric LC1D50AP7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections for secure installation. This 3-pole (3P; 3NO) contactor is designed for DIN rail mounting and has a net width of 55 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 184-253Vac (230Vac nominal; 50Hz; 0.8...1.1 x Uc) and 195.5-253Vac (230Vac nominal; 60Hz; 0.85...1.1 x Uc). The LC1D50AP7 is rated for an operating voltage (Ue) of up to 690 V, with a rated impulse voltage (Uimp) of 6 kV. It supports a rated current of 80A (AC-1) and 50A (440Vac; AC-3), and it is equipped with 1 normally open (NO) and 1 normally closed (NC) auxiliary contacts, both of the instantaneous type (1NO+1NC). The rated active power ranges from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3 category, and the rated power in horsepower (HP) varies from 3HP at 115Vac to 40HP at 575-600Vac, accommodating a wide range of applications. This contactor is built to last, with a mechanical durability of 6,000,000 operations and an electrical durability of 1,450,000 operations under load, ensuring reliable performance in various settings.

Schneider Electric

This item can ship within 5 days!

LTMR100MBD

$587.51

Verified stock: 1

Schneider Electric LTMR100MBD, part of the LTMR (TeSys T) sub-range, is designed for motor management with a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The part offers comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, and duration of last start. Thermal overload statistics cover time to trip and time to restart, while system operating statistics include run, on, start, alarm, and fault indicators. The connection type is 3 measurement current transformers with screw-clamp terminals, and it uses the Modbus communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 5-100 A with protection settings adjustable for various conditions. The supply voltage is 24 V DC, and the rated voltage for AC phase-to-phase is up to 690 V at 50-60Hz. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, accommodating a wide range of monitoring and protection needs for motor management.

Schneider Electric

LTMR100PBD

Verified stock: 0

Schneider Electric LTMR100PBD, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management and protection. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and Custom mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and more. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current and voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor and thermal overload statistics provide insights into motor control commands, operating time, number of starts per hour, last start I max, duration of last start, time to trip, and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The LTMR100PBD uses 3 measurement current transformers with a screw-clamp connection type and communicates via Profibus protocol. It is a 3 Pole device with protection functions against thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variations, earth fault, and frequent starting. Rated for currents from 5-100 A, it offers adjustable protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. The supply voltage is 24 V DC with a rated voltage for AC phase-to-phase of 690 V at 50-60Hz. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, catering to a wide range of monitoring and protection needs.

Schneider Electric

LTMR27MBD

Verified stock: 0

Schneider Electric LTMR27MBD, part of the LTMR (TeSys T) sub-range, is a motor management controller that offers a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports multiple operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The device features comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault, alarm, diagnostic fault, and motor control function counters. It also provides fault history and diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, as well as motor control commands. The LTMR27MBD records motor statistics like the number of control commands, operating time, starts per hour, last start I max, and duration of last start. Thermal overload and system operating statistics are meticulously tracked, including time to trip and restart. It utilizes 3 measurement current transformers with a screw-clamp connection type and communicates via Modbus protocol. Designed with 3 poles, its protection functions include thermal overload, motor temperature monitoring with up to 3 sensors, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault detection, and frequent starting inhibition to prevent motor overheating. The rated current ranges from 1.35 to 27 A with various protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. It operates on a 24 V DC supply voltage, supports a phase-to-phase rated voltage of up to 690 V at 50-60Hz, and offers a broad measurement function for current, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR27CFM

Verified stock: 0

Schneider Electric LTMR27CFM, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and Custom mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and more. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, and duration of last start. Thermal overload statistics offer insights into time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with screw-clamp terminals, utilizing the CANopen communication protocol. It is a 3 Pole device with protection functions against thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is AC 100-240 V, with a rated voltage for phase-to-phase at 50-60Hz 690 V. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR100DBD

Verified stock: 0

Schneider Electric LTMR100DBD, part of the LTMR (TeSys T) sub-range, is designed for motor management with a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and "Custom" mode. The device offers comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside detailed fault statistics including protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, while thermal overload statistics cover time to trip and time to restart. System operating statistics include run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with a screw-clamp control circuit. It uses the DeviceNet communication protocol and is a 3 Pole device. Protection functions include thermal overload, motor temperature monitoring with up to 3 sensors in series, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and protection against frequent starting. Rated current ranges from 5-100 A with protection settings adjustable for various conditions. Supply voltage is DC 24 V, and the rated voltage for AC phase-to-phase is 690 V at 50-60Hz. Measurement functions cover a wide range of current and temperature monitoring capabilities, ensuring comprehensive protection and management of motor operations.

Schneider Electric

LTMR27EBD

Verified stock: 0

Schneider Electric LTMR27EBD, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and a customizable mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and a detailed fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, with thermal overload statistics offering time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is through 3 measurement current transformers with screw-clamp terminals, utilizing an Ethernet TCP/IP Modbus TCP communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variations, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is DC 24 V, with a rated voltage for AC phase-to-phase at 690 V (50-60Hz). Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, catering to a broad spectrum of monitoring and protection needs.

Schneider Electric

This item can ship within 5 days!

LADT23

$63.07

Verified stock: 2

Schneider Electric LADT23 is an auxiliary contact designed for time-delayed operations, belonging to the Deca sub-range. It features a time-delayed auxiliary contact block or switch block functionality with spring connections for secure attachment. This 2-pole device offers front clip-on mounting for easy installation. It is equipped with 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts, providing a time delay range of 0.1-30 seconds for ON-delay operations.

Schneider Electric

This item can ship within 5 days!

LC1D50AP7

$160.43

Verified stock: 2

Schneider Electric LC1D50AP7 is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design and screw connections for secure installation. This 3-pole (3P; 3NO) contactor is designed for DIN rail mounting and has a net width of 55 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 184-253Vac (230Vac nominal; 50Hz; 0.8...1.1 x Uc) and 195.5-253Vac (230Vac nominal; 60Hz; 0.85...1.1 x Uc). The LC1D50AP7 is rated for an operating voltage (Ue) of up to 690 V, with a rated impulse voltage (Uimp) of 6 kV. It supports a rated current of 80A (AC-1) and 50A (440Vac; AC-3), and it is equipped with 1 normally open (NO) and 1 normally closed (NC) auxiliary contacts, both of the instantaneous type (1NO+1NC). The rated active power ranges from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3 category, and the rated power in horsepower (HP) varies from 3HP at 115Vac to 40HP at 575-600Vac, accommodating a wide range of applications. This contactor is built to last, with a mechanical durability of 6,000,000 operations and an electrical durability of 1,450,000 operations under load, ensuring reliable performance in various settings.

Schneider Electric

This item can ship within 5 days!

LTMR100MBD

$587.51

Verified stock: 1

Schneider Electric LTMR100MBD, part of the LTMR (TeSys T) sub-range, is designed for motor management with a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The part offers comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, and duration of last start. Thermal overload statistics cover time to trip and time to restart, while system operating statistics include run, on, start, alarm, and fault indicators. The connection type is 3 measurement current transformers with screw-clamp terminals, and it uses the Modbus communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 5-100 A with protection settings adjustable for various conditions. The supply voltage is 24 V DC, and the rated voltage for AC phase-to-phase is up to 690 V at 50-60Hz. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, accommodating a wide range of monitoring and protection needs for motor management.

Schneider Electric

LTMR100PBD

Verified stock: 0

Schneider Electric LTMR100PBD, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management and protection. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and Custom mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and more. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current and voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor and thermal overload statistics provide insights into motor control commands, operating time, number of starts per hour, last start I max, duration of last start, time to trip, and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The LTMR100PBD uses 3 measurement current transformers with a screw-clamp connection type and communicates via Profibus protocol. It is a 3 Pole device with protection functions against thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variations, earth fault, and frequent starting. Rated for currents from 5-100 A, it offers adjustable protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. The supply voltage is 24 V DC with a rated voltage for AC phase-to-phase of 690 V at 50-60Hz. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, catering to a wide range of monitoring and protection needs.

Schneider Electric

LTMR27MBD

Verified stock: 0

Schneider Electric LTMR27MBD, part of the LTMR (TeSys T) sub-range, is a motor management controller that offers a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports multiple operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The device features comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault, alarm, diagnostic fault, and motor control function counters. It also provides fault history and diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, as well as motor control commands. The LTMR27MBD records motor statistics like the number of control commands, operating time, starts per hour, last start I max, and duration of last start. Thermal overload and system operating statistics are meticulously tracked, including time to trip and restart. It utilizes 3 measurement current transformers with a screw-clamp connection type and communicates via Modbus protocol. Designed with 3 poles, its protection functions include thermal overload, motor temperature monitoring with up to 3 sensors, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault detection, and frequent starting inhibition to prevent motor overheating. The rated current ranges from 1.35 to 27 A with various protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. It operates on a 24 V DC supply voltage, supports a phase-to-phase rated voltage of up to 690 V at 50-60Hz, and offers a broad measurement function for current, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR27CFM

Verified stock: 0

Schneider Electric LTMR27CFM, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and Custom mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, fault history, and more. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, and duration of last start. Thermal overload statistics offer insights into time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with screw-clamp terminals, utilizing the CANopen communication protocol. It is a 3 Pole device with protection functions against thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is AC 100-240 V, with a rated voltage for phase-to-phase at 50-60Hz 690 V. Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.

Schneider Electric

LTMR100DBD

Verified stock: 0

Schneider Electric LTMR100DBD, part of the LTMR (TeSys T) sub-range, is designed for motor management with a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports operating modes such as overload, independent, reverser, 2-step, 2-speed, and "Custom" mode. The device offers comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside detailed fault statistics including protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor connection, current connection, voltage connection, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, while thermal overload statistics cover time to trip and time to restart. System operating statistics include run, on, start, alarm, and fault statuses. The connection type is 3 measurement current transformers with a screw-clamp control circuit. It uses the DeviceNet communication protocol and is a 3 Pole device. Protection functions include thermal overload, motor temperature monitoring with up to 3 sensors in series, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault, and protection against frequent starting. Rated current ranges from 5-100 A with protection settings adjustable for various conditions. Supply voltage is DC 24 V, and the rated voltage for AC phase-to-phase is 690 V at 50-60Hz. Measurement functions cover a wide range of current and temperature monitoring capabilities, ensuring comprehensive protection and management of motor operations.

Schneider Electric

LTMR27EBD

Verified stock: 0

Schneider Electric LTMR27EBD, part of the LTMR (TeSys T) sub-range, is designed for comprehensive motor management. It supports various control modes including local operation via terminal block or HMI terminal, and remote operation through a network. The device offers multiple operating modes such as Overload, Independent, Reverser, 2-step, 2-speed, and a customizable mode. Fault management capabilities include manual, automatic, and remote reset options, alongside extensive fault statistics like protection fault counters, protection alarm counters, diagnostic fault counters, motor control function counters, and a detailed fault history. It features fault diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, motor control commands, control configuration checksum, and loss of communication. Motor statistics provided include the number of motor control commands, operating time, number of starts per hour, last start I max, duration of last start, with thermal overload statistics offering time to trip and time to restart. System operating statistics cover run, on, start, alarm, and fault statuses. The connection type is through 3 measurement current transformers with screw-clamp terminals, utilizing an Ethernet TCP/IP Modbus TCP communication protocol. It is a 3 Pole device with protection functions for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variations, earth fault, and frequent starting. Rated current ranges from 1.35-27 A with protection settings adjustable for various parameters. Supply voltage is DC 24 V, with a rated voltage for AC phase-to-phase at 690 V (50-60Hz). Measurement functions include current/phase, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise, catering to a broad spectrum of monitoring and protection needs.

Schneider Electric

LADT2 Schneider Electric Industrial Automation Components

Part#:LADT2

Manufacturer:Schneider Electric

Product condition

LADT2 Description

$57.47

Schneider Electric Disclaimer:

Relevant products

LTMR27MBD

LTMR27CFM

LTMR100DBD

LTMR27EBD

LADT23

LC1D50AP7

LTMR100MBD

LTMR100PBD

LTMR27MBD

LTMR27CFM

LTMR100DBD

LTMR27EBD

LADT23

LC1D50AP7

LTMR100MBD

LTMR100PBD

LTMR27MBD

LTMR27CFM

LTMR100DBD

LTMR27EBD

We are a proud member of: