LTMR27MBD Schneider Electric Industrial Automation Components
Part#:LTMR27MBD
Manufacturer:Schneider Electric
Product Lifecycle:Active
Get a quick Quote!
Schneider Electric LTMR27MBD, part of the LTMR (TeSys T) sub-range, is a motor management controller that offers a variety of control modes including local via terminal block, local via HMI terminal, and remote via network. It supports multiple operating modes such as overload, independent, reverser, 2-step, 2-speed, and custom mode. The device features comprehensive fault management capabilities with manual, automatic, and remote reset options, alongside protection fault, alarm, diagnostic fault, and motor control function counters. It also provides fault history and diagnostics for internal watchdog faults, controller internal temperature, temperature sensor, current, and voltage connections, as well as motor control commands. The LTMR27MBD records motor statistics like the number of control commands, operating time, starts per hour, last start I max, and duration of last start. Thermal overload and system operating statistics are meticulously tracked, including time to trip and restart. It utilizes 3 measurement current transformers with a screw-clamp connection type and communicates via Modbus protocol. Designed with 3 poles, its protection functions include thermal overload, motor temperature monitoring with up to 3 sensors, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, minimum and maximum current load limit variation, earth fault detection, and frequent starting inhibition to prevent motor overheating. The rated current ranges from 1.35 to 27 A with various protection settings for thermal overload, motor temperature, phase imbalance, phase failure, phase reversal, long starting time, locked rotor, current load limit variations, and earth fault. It operates on a 24 V DC supply voltage, supports a phase-to-phase rated voltage of up to 690 V at 50-60Hz, and offers a broad measurement function for current, earth current, average current, current imbalance between phases, thermal capacity level, and motor temperature rise.
About the manufacturer: Schneider Electric is one of the manufacturers that offers Industrial Automation Components that you can order at Quotebeam.com. We provide digital solutions for energy and automation that improve efficiency and support sustainability. Our comprehensive solutions include cutting-edge energy technologies, real-time automation, software, and services for residential, commercial, and industrial settings.
Check out the LTMR27MBD Schneider Electric price in the box on the right side or send a quick quote.
Product Details
- Protection Type Thermal overload protection Locked rotor Earth-leakage protection Thermal protection Phase failure Phase unbalance Reverse polarity protection Overload (long time) Overload Power factor variation Load fluc
- Network And Machine Diagnosis Type Starting current and time Running hours counter/operating time Remaining operating time before overload tripping Trip history information Trip context information Event recording Waiting time after overload tripping Phas
- Measurement Accuracy 5...15 % earth fault current internal measurement 1 % voltage 100...830 V) 3 % power factor 5 % earth fault current external measurement +/- 30 min/year internal clock 0,02 Temperature 1 % current 5 % active and reactive
- Metering Type Temperature Average current Iavg Earth-fault current Imbalance current Phase current I1, I2, I3 RMS
- Electromagnetic Compatibility Electrostatic discharge, 3 8 kV air, 6 kV contact)EN/IEC 61000-4-2) Radiated RF fields, 3 10 V/m)EN/IEC 61000-4-3) Fast transients immunity test, level 3 2 kV)EN/IEC 61000-4-4) Fast transients immunity test, level 4 4 kV)EN/IEC 61000-4-4)
- [Uimp] Rated Impulse Withstand Voltage
6 kV current or voltage measurement circuit EN/IEC 60947-4-1 0.8 kV communication circuit EN/IEC 60947-4-1 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1- Connections - Terminals
Control circuit connector 1 0.00…0.00 in² (0.25…2.5 mm²) AWG 24...AWG 14)flexible with cable end Control circuit connector 1 0.00…0.00 in² (0.2…2.5 mm²) AWG 24...AWG 14)flexible without cable end Control circuit connector 1 0.00…0.00 in² (0.25…2- [Ui] Rated Insulation Voltage
690 V EN/IEC 60947-1 690 V CSA C22.2 No 14 690 V UL 508- Load Current
5 A 250 V AC logic output 5 A 30 V DC logic output- Associated Fuse Rating
4 A gG output 0.5 A gG control circuit- Permissible Power
480 VA AC-15), Ie = 2 A, 500000 cycles output) 30 W DC-13), Ie = 1.25 A, 500000 cycles output)- Contacts Type And Composition
1 NO + 1 NC fault signal 3 NO- Bus Type
Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs- Compatibility Code
LTMR- Web Services
Web server- Width
3.58 in (91 mm)- Height
2.40 in (61 mm)- Depth
4.82 in (122.5 mm)- Tightening Torque
Control circuit 4.43…5.31 lbf.in (0.5…0.6 N.m) flat 0.12 in (3 mm)- Pollution Degree
3- Net Weight
1.17 lb(US) (0.53 kg)- Connection Pitch
0.20 in (5.08 mm)- Maximum Operating Rate
1800 cyc/h- Overvoltage Category
III- Maximum Output Switching Frequency
2 Hz- Current State 1 Guaranteed
Logic input < 15 V 2...15 mA 15 ms- Current State 0 Guaranteed
Logic input < 5 V <= 15 mA 5 ms- Input Current
7 mA- Logic Input Number
6- Short-Circuit Withstand
100 kA EN/IEC 60947-4-1- Communication Port Protocol
Modbus- Product Or Component Type
Motor controller- Device Application
Equipment monitoring and control- Current Consumption
56...127 mA- Supply Voltage Limits
20.4…26.24 V DC- [Us] Rated Supply Voltage
24 V DC- Measurement Current
1.35…27 A- Device Short Name
LTMR- Product Name
TeSys T- Range
TeSysProduct condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
Related documents LTMR27MBD Specs
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Schneider Electric
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
- [Uimp] Rated Impulse Withstand Voltage
Schneider Electric Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Schneider Electric Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Schneider Electric, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
