3273334 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Color
  red
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Connection method
  Push-in connection
• Conductor cross section AWG max.
  8
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Open side panel
  No
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Length
  28.6 mm
• Connection in acc. with standard
  IEC 60998-2-2
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section feed-in
6 mm²
Flammability rating according to UL 94
V0
Maximum total current
57 A (with 10 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock form
Half-sine
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of connections
7
Rated surge voltage
6 kV
Insulating material group
I
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Height
21.7 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Value
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 3.0
EC000897
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
450 V
Finger protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Width
25.6 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Max. AWG conductor cross section, flexible
10
Connection
Feed-in stage
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
ETIM 4.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ECLASS 11.0
27141120
China RoHS
Environmentally friendly use period: unlimited = EFUP-e