3247054 Phoenix Contact Terminal Blocks

3247054 Product Details

• ECLASS 10.0.1
  27141120
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• Number of levels
  1
• Color
  black/yellow
• Rated surge voltage
  8 kV
• Insulating material group
  I
• Shock protection test specification
  IEC 60529:2013-08
• Number of connections
  2
• Insulating material
  PA
• Nominal voltage UN
  1000 V
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  25 mm² / 4.5 kg
• Tractive force setpoint
  351 N
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Width
  25 mm
Height NS 32
95 mm
Tightening torque max
20 Nm
Conductor cross section flexible max.
95 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
35 mm²
2 conductors with same cross section, solid max.
35 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
35 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
ECLASS 11.0
27141120
ECLASS 5.1
27141100
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Terminal block mounting
15 Nm ... 20 Nm (PE foot with mounting screw, M8)
Bending test rotation speed
10 rpm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
95 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
11.4 kA
Acceleration
30g
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
97.5 mm
Screw thread
M8
Conductor cross section AWG min.
4
Conductor cross section flexible min.
35 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
95 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
95 mm²
2 conductors with same cross section, stranded max.
35 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section AWG max.
3/0
Min. AWG conductor cross section, flexible
2
2 conductors with same cross section, stranded min.
25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
16 mm²
Potentials
1
Maximum power dissipation for nominal condition
7.54 W
Maximum load current
232 A
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Connection in acc. with standard
CUL
Nominal cross section
95 mm²
Degree of pollution
3
Nominal current IN
232 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tight fit on carrier
NS 32/NS 35
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
25 mm²
Cross section with insertion bridge, solid max.
95 mm²
Finger protection
guaranteed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
95 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
33 mm
Tightening torque, min
15 Nm
Conductor cross section solid max.
95 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Max. AWG conductor cross section, flexible
3/0
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
35 mm²
2 conductors with same cross section, solid min.
25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 7.0
EC000897
Length
83 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
UNSPSC 19.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Cross section with insertion bridge, stranded max.
70 mm²

Product condition