3247051 Phoenix Contact Terminal Blocks

3247051 Product Details

• Shock form
  Half-sine
• Number of levels
  1
• Color
  gray
• Insulating material
  PA
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of flexion and pull-out test
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Number of connections
  2
• Area of application
  Railway industry
• Insulating material group
  I
Nominal current IN
192 A
Nominal voltage UN
1000 V
Finger protection
guaranteed
Tensile test result
Test passed
Conductor cross section short circuit testing
70 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
80 mm
Tightening torque max
10 Nm
Conductor cross section solid min.
16 mm²
Conductor cross section flexible min.
25 mm²
Max. AWG conductor cross section, flexible
2/0
Conductor cross section flexible, with ferrule with plastic sleeve min.
16 mm²
Internal cylindrical gage
A11
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Nominal cross section
70 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
6.27 W
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
25 mm² / 4.5 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short-time current
8.4 kA
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
20.3 mm
Screw thread
M8
Connection method
Screw connection
Conductor cross section AWG min.
4
Min. AWG conductor cross section, flexible
3
Conductor cross section flexible, with ferrule without plastic sleeve min.
16 mm²
2 conductors with same cross section, stranded min.
16 mm²
2 conductors with same cross section, stranded max.
25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Number of positions
1
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Maximum load current
192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
10 N
Result of voltage-drop test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
103.4 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve max.
70 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
70 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
16 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
25 mm²
2 conductors with same cross section, solid max.
25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ETIM 6.0
EC000897
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Tightening torque, min
8 Nm
Conductor cross section AWG max.
3/0
Conductor cross section solid max.
95 mm²
Conductor cross section flexible max.
70 mm²
2 conductors with same cross section, solid min.
16 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Stripping length
24 mm

Product condition