3247974 Phoenix Contact Terminal Blocks

3247974 Product Details

• Connection in acc. with standard
  UL
• UNSPSC 11
  39121410
• UNSPSC 12.01
  39121410
• ECLASS 6.0
  27141100
• Screw thread
  M8
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
• ECLASS 5.1
  27141100
• ETIM 7.0
  EC000897
• UNSPSC 18.0
  39121410
• ETIM 6.0
  EC000897
• Min. cross section for cable lug connection
  2.5 mm²
• UNSPSC 19.0
  39121410
• UNSPSC 21.0
  39121410
• Number of positions
  1
• Potentials
  1
• Rated surge voltage
  8 kV
• Nominal voltage UN
  1500 V
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2.2 kV
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
70 mm²
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Width
29 mm
Connection method
Bolt connection
Nominal cross section
70 mm²
Overvoltage category
III
Nominal current IN
192 A
Finger protection
guaranteed
Number of levels
1
Insulating material
PA
Insulating material group
I
Maximum load current
192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Short circuit stability result
Test passed
Height
66 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Pitch
29 mm
Number of connections
2
Color
blue
Area of application
Railway industry
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Note regarding shock protection
Touch proofness is effective only if the ring cable lug is insulated with a shrink sleeve and does not extend beyond the cover.
Result of surge voltage test
Test passed
Short-time current
8.4 kA
Acceleration
5g
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Flammability rating according to UL 94
V0
Degree of pollution
3
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Shock test result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
67 mm
ETIM 3.0
EC000897
Maximum power dissipation for nominal condition
6.27 W
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
184 mm
Height NS 35/15
74.5 mm
Connection
1 level
Hole diameter, min.
8.4 mm
Tightening torque, min
6 Nm
Permissible humidity (storage/transport)
30 % ... 70 %
Cable lug connection according to standard
DIN 46237:1970-07
Tightening torque max
12 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Max. cross section for cable lug connection
6 mm²
Cable lug width, max.
14 mm
ECLASS 4.1
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Number of shocks per direction
3
Bolt diameter
8 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ECLASS 10.0.1
27141120
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of thermal test
Test passed
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Ambient temperature (assembly)
-5 °C ... 70 °C
Setpoint
10 N
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C

Product condition