3247976 Phoenix Contact Terminal Blocks

3247976 Product Details

• Hole diameter, min.
  10.5 mm
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Static insulating material application in cold
  -60 °C
• Overvoltage category
  III
• Open side panel
  No
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.1
  27141100
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Connection method
  Bolt connection
• Connection in acc. with standard
  CSA
• Cable lug width, max.
  18 mm
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ETIM 3.0
  EC000897
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  30 ms
• Number of levels
  1
• Nominal cross section
  150 mm²
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
Maximum load current
309 A (with 150 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Setpoint
15 N
Maximum power dissipation for nominal condition
9.55 W
Nominal current IN
309 A
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Color
gray
Insulating material group
I
Nominal voltage UN
1500 V
Back of the hand protection
guaranteed
Length
235 mm
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
1.857 (m/s2)2/Hz
UNSPSC 12.01
39121410
Short circuit stability result
Test passed
Shock test result
Test passed
Shock form
Half-sine
Number of connections
2
Rated surge voltage
8 kV
Power frequency withstand voltage setpoint
2.7 kV
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
150 mm²
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Acceleration
5g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection
1 level
Min. cross section for cable lug connection
6 mm²
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Tightening torque max
20 Nm
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Area of application
Railway industry
Note regarding shock protection
Touch proofness is effective only if the ring cable lug is insulated with a shrink sleeve and does not extend beyond the cover.
Result of voltage-drop test
Test passed
Short-time current
18 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
77 mm
Screw thread
M10
Bolt diameter
10 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Number of positions
1
Potentials
1
Insulating material
PA
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/15
84.5 mm
Tightening torque, min
10 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Max. cross section for cable lug connection
6 mm²
ECLASS 5.0
27141100
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
41 mm
Pitch
41 mm
Cable lug connection according to standard
DIN 46237:1970-07
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410

Product condition