3211993 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Potentials
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W
• Maximum load current
  28 A (with 4 mm² conductor cross section, rigid)
• Open side panel
  Yes
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 rpm
• Bending test turns
  135
• Tight fit on carrier
  NS 35
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Short-time current
  0.48 kA
• Oscillation, broadband noise test result
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  5g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
49 mm
Connection
1 level
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
43 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of connections
4
Color
gray
Rated surge voltage
8 kV
Insulating material group
I
Nominal current IN
24 A (with 4 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s2)2/Hz
Shock form
Half-sine
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
50.5 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811