3211886 Phoenix Contact Terminal Blocks

Product Details

• Note
  Swing the locking lever to its final position before replacing the fuse.
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Insulating material group
  I
• Nominal voltage UN
  500 V
• Number of levels
  2
• Nominal cross section
  4 mm²
• Number of connections
  4
• Color
  black
• Maximum power dissipation for nominal condition
  1.02 W
• Rated operating voltage
  250 V
• Overvoltage category
  III
• Nominal current IN
  28 A
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock duration
  30 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Static insulating material application in cold
  -60 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
75.5 mm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Stripping length
10 mm ... 12 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141116
ECLASS 4.1
27141100
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ECLASS 9.0
27141116
ETIM 4.0
EC000899
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Connection method
Push-in connection
Internal cylindrical gage
A4
ECLASS 10.0.1
27141116
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ECLASS 7.0
27141116
ETIM 3.0
EC000899
ETIM 6.0
EC000899
ETIM 7.0
EC000899
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Finger protection
guaranteed
Result of tight fit on support
Test passed
Connection in acc. with standard
IEC 60947-7-1
Fuse
G / 5 x 20
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Nominal current IN (upper level)
6.3 A
Fuse type
Glass / ceramics / ...
Compatibitity between modular fuse terminal block and fuse insert
Test passed
Result of flexion and pull-out test
Test passed
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Shock test result
Test passed
Length
102.9 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Maximum load current
32 A (bei 6 mm² Leiterquerschnitt starr)
Maximum load current (upper level)
6.3 A (the current is determined by the fuse used)
Open side panel
No
Back of the hand protection
guaranteed
Surge voltage test setpoint
4 kV
Contact resistance
Test passed
Bending test rotation speed
10 rpm
Testing the rated value of the power dissipation (exclusively short circuit protection)
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Power frequency withstand voltage setpoint
1.5 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Height NS 35/15
83 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Actuatiing forces on plug in or lever in fuse insert carriers
Test passed
Bending test turns
135
Testing the rated value of the power dissipation (overload and short circuit Protection)
Test passed
Result of temperature-rise test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test duration per axis
5 h
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24