3211838 Phoenix Contact Terminal Blocks

Product Details

• Color
  blue
• Degree of pollution
  3
• Maximum load current
  32 A (with 6 mm² conductor cross section, rigid)
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Setpoint
  1 N
• Conductor cross section short circuit testing
  6 mm²
• Result of thermal test
  Test passed
• Conductor cross section solid min.
  0.2 mm²
• Nominal cross section
  4 mm²
• Area of application
  Machine building
• Insulating material group
  I
• Nominal current IN
  28 A
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Result of power-frequency withstand voltage test
  Test passed
• Surge voltage test setpoint
  9.8 kV
• Tensile test result
  Test passed
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
54.5 mm
Number of levels
2
Overvoltage category
III
Nominal voltage UN
800 V
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tractive force setpoint
80 N
Requirements, voltage drop
≤ 3.2 mV
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Insulating material
PA
Rated surge voltage
8 kV
Connection in acc. with standard
IEC 60947-7-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Length
96 mm
Height NS 35/15
62 mm
Conductor cross section flexible min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
Power frequency withstand voltage setpoint
2 kV
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
6 mm²
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
ECLASS 11.0
27141120
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock duration
18 ms
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ETIM 4.0
EC000897
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Connection method
Push-in connection
Conductor cross section flexible max.
6 mm²
Conductor cross section AWG min.
24
Stripping length
10 mm ... 12 mm
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
ECLASS 4.1
27141100
UNSPSC 11
39121410
UNSPSC 21.0
39121410