3211832 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  4 mm²
• Insulating material
  PA
• Rated surge voltage
  8 kV
• Connection in acc. with standard
  IEC 60947-7-1
• Back of the hand protection
  guaranteed
• Bending test rotation speed
  10 rpm
• Setpoint
  1 N
• Result of aging test
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Number of connections
  4
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Nominal voltage UN
  800 V
• Result of power-frequency withstand voltage test
  Test passed
• Power frequency withstand voltage setpoint
  2 kV
• Height NS 35/7,5
  54.5 mm
ECLASS 5.1
27141100
Color
gray
Degree of pollution
3
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Finger protection
guaranteed
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
6.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of levels
2
Area of application
Machine building
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
96 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Internal cylindrical gage
A4
ECLASS 4.1
27141100
UNSPSC 13.2
39121410
Overvoltage category
III
Nominal current IN
28 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Shock test result
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
6 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
62 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
ECLASS 5.0
27141100
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Result of tight fit on support
Test passed
Short-time current
0.72 kA
Ageing test for screwless modular terminal block temperature cycles
192
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Stripping length
10 mm ... 12 mm
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 11.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 7.0901
39121410