3211825 Phoenix Contact Terminal Blocks

Product Details

• Stripping length
  10 mm ... 12 mm
• ETIM 3.0
  EC000897
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• ECLASS 11.0
  27141120
• ECLASS 10.0.1
  27141120
• ECLASS 9.0
  27141120
• Result of power-frequency withstand voltage test
  Test passed
• Conductor cross section tensile test
  6 mm²
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Checking the mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Connection in acc. with standard
  CSA
• Result of temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Oscillation, broadband noise test result
  Test passed
• Shock duration
  18 ms
• Height NS 35/7,5
  47.5 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• UNSPSC 11
  39121410
• Back of the hand protection
  guaranteed
ECLASS 5.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section solid max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
10
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
UNSPSC 18.0
39121410
Insulating material group
I
Nominal current IN
30 A (with 4 mm² conductor cross section)
Color
gray
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Number of levels
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Nominal voltage UN
500 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Short-time current
0.72 kA
Result of aging test
Test passed
Acceleration
30g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Insulating material
PA
Area of application
Railway industry
Test directions
X-, Y- and Z-axis (pos. and neg.)
Width
6.2 mm
Number of connections
4
Rated surge voltage
6 kV
Maximum load current
32 A (for a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors)
Open side panel
Yes
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tractive force setpoint
80 N
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Nominal cross section
4 mm²
Degree of pollution
3
Overvoltage category
III
Short circuit stability result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
55 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 35
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
83.5 mm
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Conductor cross section AWG min.
24
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ECLASS 4.0
27141100
Requirements, voltage drop
≤ 3.2 mV