3211822 Phoenix Contact Terminal Blocks

Product Details

• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Connection cross sections directly pluggable
  1 mm² 10 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.0
  27141100
• ECLASS 5.0
  27141100
• ETIM 2.0
  EC000901
• Nominal cross section
  6 mm²
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/7,5
  43.5 mm
• Connection method
  Push-in connection
• Min. AWG conductor cross section, flexible
  20
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Acceleration
  30g
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
57.7 mm
Note
Please observe the current carrying capacity of the DIN rails.
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 4.0
EC000901
UNSPSC 13.2
39121410
Conductor cross section AWG max.
8
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Number of levels
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
End cover width
2.2 mm
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141141
Height NS 35/15
51 mm
Connection in acc. with standard
CSA
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Rated surge voltage
8 kV
Color
green-yellow
Area of application
Railway industry
Open side panel
Yes
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
42.2 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 9.0
27141141
ECLASS 7.0
27141141
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Number of connections
2
Degree of pollution
3
Finger protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
8.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
ECLASS 10.0.1
27141141
ETIM 3.0
EC000901
UNSPSC 12.01
39121410
ETIM 6.0
EC000901
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Internal cylindrical gage
A5
UNSPSC 19.0
39121410
ETIM 7.0
EC000901
UNSPSC 20.0
39121410
ECLASS 4.1
27141100
UNSPSC 6.01
30211811