2904598 Phoenix Contact AC/DC Power Supplies

2904598 Product Details

• Installation distance right/left (passive)
  5 mm / 5 mm (POut ≥50% )
• Installation distance right/left (active)
  15 mm / 15 mm (POut ≥50% )
• Degree of protection
  IP20
• Degree of pollution
  2
• Frequency range (fN)
  50 Hz ... 60 Hz -10 % ... +10 %
• Input fuse
  3.15 A (slow-blow, internal)
• Nominal output voltage
  24 V DC
• Dynamic Boost (IDyn.Boost)
  5 A (≤60 °C (5 s), Input <150 V AC Derating 0.5 %/V)
• Derating
  > 60 °C (2.5%/K)
• Connection in parallel
  Yes, for redundancy and increased capacity
• Environmental protection directive
  RoHS Directive 2011/65/EU
• Conductor cross section solid min.
  0.14 mm²
• Conductor cross section AWG min.
  26
• Standard - power supply devices for low voltage with DC output
  EN 61204-3
• Noise emission
  EN 55016
• Test field strength
  1000 A/m
• Output
  1 kV (Test Level 3 - symmetrical)
• Power frequency magnetic field
  EN 61000-4-8
• Pulse-shape magnetic field
  EN 61000-4-9
• Number of periods
  0.5 / 1 / 5 / 50 periods
Attenuated oscillating wave
EN 61000-4-18
REACh SVHC
Lead 7439-92-1
ECLASS 5.1
27242213
UNSPSC 21.0
39121004
Width
32 mm
Installation distance top/bottom (active, passive)
30 mm / 30 mm (POut ≤50 %)
Inflammability class in acc. with UL 94 (housing / terminal blocks)
V0
Max. permissible relative humidity (operation)
≤ 95 % (at 25 °C, non-condensing)
Dielectric strength maximum
300 V AC 30 s
Current consumption
0.85 A (100 V AC)
Type of protection
Transient surge protection
Setting range of the output voltage (USet)
24 V DC ... 28 V DC (constant capacity)
Connection in series
yes
Residual ripple
< 40 mVPP (with nominal values)
Maximum power dissipation in no-load condition
< 1 W (230 V AC)
Power loss nominal load max.
< 5 W (230 V AC)
Protection class
II
Conductor cross section flexible max.
2.5 mm²
Standard - Safety of transformers
EN 61558-2-16
Frequency
60 Hz
EMC requirements for noise emission
EN 61000-6-3
UL approvals
UL Listed UL 61010-1
Electromagnetic compatibility
Conformance with EMC Directive 2014/30/EU
Frequency range
50 Hz ... 60 Hz
Comments
Criterion B
Conducted interference
EN 61000-4-6
Voltage dips
EN 61000-4-11
Test level 1
16.67 Hz 50 Hz 60 Hz (Test Level 3)
ECLASS 11.0
27040701
ECLASS 7.0
27049002
ETIM 6.0
EC002540
Height
99 mm
Installation distance top/bottom (active)
30 mm / 30 mm (POut ≥50% )
Ambient temperature (operation)
-25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
Mains buffering time
typ. 54 ms (120 V AC)
Recommended breaker for input protection
6 A ... 16 A (Characteristic B, C or comparable)
Feedback voltage resistance
≤ 35 V DC
Control deviation
< 0.5 % (Static load change 10 % ... 90 %)
Efficiency
typ. 91.9 % (120 V AC)
MTBF (IEC 61709, SN 29500)
> 1347000 h (25 °C)
Connection method
Screw connection
Stripping length
8 mm
Standard - safety for equipment for measurement, control, and laboratory use
IEC 61010-1
Standard – Safety extra-low voltage
IEC 61010-1 (SELV)
Standard - Safe isolation
IEC 61558-2-16
Discharge in air
8 kV (Test Level 3)
Contact discharge
8 kV (Test Level 4)
Fast transients (burst)
EN 61000-4-4
Additional text
Test Level 2
Test level 2
16.67 Hz 50 Hz 60 Hz (Test Level 4)
Criterion C
Temporary adverse effects on the operating behavior, which the device corrects automatically or which can be restored by actuating the operating elements.
China RoHS
Environmentally Friendly Use Period = 25;
UNSPSC 18.0
39121004
UNSPSC 20.0
39121004
Depth
90 mm
Installation distance top/bottom (passive)
30 mm / 30 mm (POut ≥50% )
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Climatic class
3K3 (in acc. with EN 60721)
Discharge current to PE
< 0.25 mA (264 V AC, 60 Hz)
Protective circuit/component
Varistor
Nominal output current (IN)
2.5 A
Typical response time
500 ms
Assembly instructions
DIN rail mounting
Conductor cross section flexible min.
0.14 mm²
EMC requirements for noise immunity
EN 61000-6-1
Standard – Limitation of mains harmonic currents
EN 61000-3-2
Electromagnetic HF field
EN 61000-4-3
Input
2 kV (symmetrical)
I/O/S
asymmetrical
Attenuated sinusoidal oscillations (ring wave)
EN 61000-4-12
Criterion A
Normal operating behavior within the specified limits.
ECLASS 10.0.1
27040701
ECLASS 9.0
27040701
UNSPSC 19.0
39121004
Ambient temperature (start-up type tested)
-40 °C
Installation height
≤ 5000 m (> 2000 m, observe derating)
Nominal power consumption
71 VA
Inrush current
typ. 10 A (at 25 °C)
Static Boost (IStat.Boost)
3.125 A (≤ 40 °C)
Protection against overvoltage at the output (OVP)
≤ 32 V DC
Output power
60 W
Net weight
0.244 kg
Insulation voltage input/output
4 kV AC (type test)
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Standard - Electrical safety
IEC 61010-2-201 (SELV)
SIQ
CB-Scheme (IEC 61010-1, IEC 61010-2-201)
Conducted noise emission
EN 55016
Electrostatic discharge
EN 61000-4-2
Signal
2 kV (Test Level 4 - symmetrical)
Surge voltage load (surge)
EN 61000-4-5
Voltage
300 V (1 s)
Voltage dip
0 %
Asymmetrical conducted disturbance variables
EN 61000-4-16
Criterion B
Temporary impairment to operational behavior that is corrected by the device itself.
ECLASS 6.0
27049000
ETIM 7.0
EC002540
UNSPSC 13.2
39121004

Product condition