3211485 Phoenix Contact Terminal Blocks

Product Details

• Connection cross sections directly pluggable
  1 mm² 10 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  1 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  1 mm²
• Internal cylindrical gage
  A5
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Nominal voltage UN
  1000 V
• Back of the hand protection
  guaranteed
• Potentials
  1
• Power frequency withstand voltage setpoint
  2.2 kV
• Conductor cross section tensile test
  10 mm²
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Bending test turns
  135
• Setpoint
  5 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
6 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
74.2 mm
Tight fit on carrier
NS 35
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
0.72 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ECLASS 11.0
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Nominal current IN
41 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
9.8 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Nominal cross section
6 mm²
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
8.2 mm
Height NS 35/15
51 mm
Conductor cross section solid max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ETIM 4.0
EC000897
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Number of connections
3
Area of application
Railway industry
Overvoltage category
III
Maximum load current
52 A (for a 10 mm² rigid conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of power-frequency withstand voltage test
Test passed
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tractive force setpoint
90 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Shock test result
Test passed
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Connection
1 level
Height
42.2 mm
Connection in acc. with standard
CSA
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W
Open side panel
Yes
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Result of tight fit on support
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Short circuit stability result
Test passed
Acceleration
30g
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Color
blue
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
43.5 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 12.01
39121410