3210609 Phoenix Contact Terminal Blocks

3210609 Product Details

• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Maximum load current
  24 A (with 4 mm² conductor cross section, rigid)
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tight fit on carrier
  NS 35
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Number of shocks per direction
  3
• Number of levels
  2
• Insulating material
  PA
• Insulating material group
  I
• Open side panel
  Yes
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Height NS 35/15
62.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ECLASS 9.0
27141120
Rated surge voltage
6 kV
Nominal current IN
20 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Conductor cross section tensile test
4 mm²
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
Color
gray
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of tight fit on support
Test passed
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 21.0
39121410
Number of connections
8
Flammability rating according to UL 94
V0
Connection in acc. with standard
IEC 60947-7-1
Nominal voltage UN
800 V
Surge voltage test setpoint
7.3 kV
Result of flexion and pull-out test
Test passed
Tractive force setpoint
60 N
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
115.2 mm
Height NS 35/7,5
55 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410

Product condition