3210442 Phoenix Contact Terminal Blocks

3210442 Product Details

• Insulating material
  PA
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Maximum load current
  32 A (with 6 mm² conductor cross section, rigid)
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tractive force setpoint
  80 N
• Short-time current
  0.72 kA
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test duration per axis
  5 h
• Number of shocks per direction
  3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
96.9 mm
Conductor cross section solid max.
6 mm²
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 11.0
27141141
UNSPSC 18.0
39121410
Color
gray
Nominal current IN
26 A (with 4 mm² conductor cross section)
Open side panel
Yes
Surge voltage test setpoint
9.8 kV
Tensile test result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
6 mm²
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
6.2 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of levels
4
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
6 mm²
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
104.4 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A4
ECLASS 5.0
27141100
ECLASS 7.0
27141141
UNSPSC 19.0
39121410
Number of connections
7
Rated surge voltage
6 kV
Insulating material group
I
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
95.4 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Stripping length
10 mm ... 12 mm
ECLASS 9.0
27141141
UNSPSC 21.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
104.4 mm
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
ETIM 7.0
EC000901
ETIM 6.0
EC000901
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100

Product condition